D-Link DIR-879 User Manual page 47

Section 4 - Coniguration
If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the
LAN IPv6
router.
Address:
Displays the router's LAN link-local address.
LAN IPv6 Link-
Local Address:
Enable or disable the Automatic IPv6 Address Assignment feature.
Enable
Automatic
IPv6 Address
Assignment:
Enable or disable DHCP-PD for other IPv6 routers connected to the
Enable
LAN interface.
Automatic
DHCP-PD in
LAN:
Note: This feature requires a smaller subnet preix than /64 (i.e. allowing
for a larger address allocation), such as /63. Contact your ISP for more
information.
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Auto
Coniguration DHCPv6
Type:
Enter the IPv6 address lifetime (in minutes).
Router
Advertisement
Lifetime:
Click Save when you are done.
D-Link DIR-879 User Manual 43