Setting The Tv System; Resetting The Player; Power Reset; Dvd-Video Regions - Pioneer DV-470 Operating Instructions Manual

Dvd player lettore per dvd dv-470 operating instructions
Table of Contents

Advertisement

Available languages

Available languages

Additional information
Note
• Using the 16:9 (Wide) setting with a
standard 4:3 TV, or either of the 4:3 settings
with a widescreen TV, will result in a
distorted picture.

Setting the TV system

The default setting of this player is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO. If you experience picture distor-
tion with some discs, set the TV system to
match your country or region's system. Doing
this, however, may restrict the kinds of disc you
can watch. The table below shows what kinds
of disc are compatible with each setting
(AUTO, PAL and NTSC).
1
If the player is on, press
ON to switch it to standby.
2
Using the front panel controls, hold
down
then press
switch the TV system.
The TV system changes as follows:
• AUTO
NTSC
• NTSC
PAL
• PAL
AUTO
Note
• You have to switch the player into standby
STANDBY/ON) before each
(press
change.
Disc
Type
Format NTSC
DVD/Super VCD/
NTSC
Video CD/DivX
PAL
Video
CD/MP3/WMA/
JPEG
no disc
STANDBY/
STANDBY/ON to
Player setting
PAL
AUTO
NTSC
PAL
NTSC
NTSC
PAL
PAL
NTSC
PAL
NTSC or
PAL

Resetting the player

Use this procedure to reset all the player's
settings to the factory default.
1
Switch the player into standby.
2
Using the front panel buttons,
hold down the
(stop) button and press
STANDBY/ON to switch the player back
on.
All the player's settings are now reset.

Power reset

Use this procedure to switch the power off if
the player is unresponsive to any control from
the front panel or remote.
1
Press and hold the front panel
STANDBY/ON for 10 seconds.
When the power is completely off, you cannot
use the remote to switch it back on again. Use
STANDBY/ON button.
the front panel

DVD-Video regions

All DVD-Video discs carry a region mark on the
case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD player also has a region mark,
which you can find on the rear panel. Discs
from incompatible regions will not play in this
player. Discs marked ALL will play in any
player.
The diagram below shows the various DVD
regions of the world.
1
2
4
5
1
6
2
3
5
2
4
08
39
En

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents