Mooer HORNET RED Owner's Manual page 3

Power Supply
Please connect the DC POWER Supply to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 18V DC(±5%),
, center negative. Unplug the AC power adapter when not in use
or during electrical storms.
Connections
or disconnecting, this will help prevent malfunction and / or damage to
other devices. Also make sure to disconnect all connection cables and
the power cord before moving this unit.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax,
solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception
interference.
Operate this unit at a suitable distance from radios and televisions.
Location
To avoid deformation, discoloration, or other serious damage, do not
expose this unit to the following conditions:
Direct sunlight
Magnetic fields
Excessive dusty or dirty location
Strong vibrations or shocks
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
that may cause undesired operation.
Precautions
01
Heat sources
Extreme temperature or humidity
High humidity or moisture