80
Using the PC
TIP
•
If you do not complete the initial automatic channel configuration step, the
configuration window will appear every time you use the TV.
•
The configuration window disappears automatically, after a certain amount of time, if
you do not proceed with the initial configuration.
•
The automatic channel configuration memorizes only the active channels. If you
press the [Exit] button while searching for channels, or terminate the configuration,
only those channels searched up until the point of termination will be memorized.
1
Connect the power cord and press [Power] button on the remote control.
If you are using the TV function only, you don't have to turn on the product.
2
After a moment, the Monitor/TV power lamp turns off and the TV turns on.
3
When the following screen opens, select a language as you wish and press [OK] button
on the remote control.