Auto Reconnect - Motorola VERVE ONES ME Read Me First

Pair with Bluetooth
4
Note: Only the right earbud will connect to your device. The right
earbud may also be used as a single headset. Certain versions of
this headset may only have tones and no voice prompts.

Auto Reconnect

VerveOnes ME will automatically reconnect to the last paired
device after it is removed from the case and turned on. VerveOnes
ME can be found and paired with other device if the last paired
device is out of range 10 seconds after it is turned on. (repeat
above step 3)
en
Turn on Bluetooth on your device.
First-time pairing
Take the right side earbuds out of the case, press and
hold the button until blue LED lights up, then release the
buttons. (Right earbud wil then flash blue/ red
alternately)
On your device, go to the Bluetooth menu, select
VerveOnes ME, pair & connect. After device paired,
voice prompt "paird" will be heard. When the right
earbud is connected to the device, you will hear a voice
prompt "VerveOnes Connected".
Take the left side earbuds and press the button to turn on.
The left earbud pairs with the right earbud automatically.
You will hear "earbuds linked" when they are paired.
3