Specifications; Chassis Physical Design - Dell S4100–ON Series Installation Manual

This section lists the S4100–ON Series (S4128F-ON and S4148F-ON) switch specifications.
CAUTION: Operate the product at an ambient temperature not higher than 113°F—45°C.
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same
or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.
Topics:
•

Chassis physical design

• IEEE standards
• Agency compliance
• USA Federal Communications Commission (FCC) statement
• European Union EMC directive conformance statement
• Japan: VCCI compliance for class A equipment
• Korean certification of compliance
• Safety standards and compliance agency certifications
• Electromagnetic compatibility (EMC)
• Product recycling and disposal
Chassis physical design
Table 13. Chassis physical design
Parameter
Height
Width
Depth
Chassis weight with factory-installed components
Rack clearance required
40

Specifications

Specifications
Specifications
1.71 inches (43.5 mm)
17.1 inches (434 mm)
18.1 inches (460 mm)
Handle: 0.82 inch (21 mm)
S4128F-ON: 19.66 lbs/8.92 kg (2* PSUs)
S4148F-ON: 20.15 lbs/9.14 kg (2* PSUs)
Front: 5 inches (12.7 cm)
Back: 5 inches (12.7 cm)
8