Advertisement
Quick Links
OPERATORS' GUIDE
REL-954RC
SINGLE ACTING HYDRAULIC
CUTTING TOOL
Single
Acting
CUT UP TO
RELIABLE EQUIPMENT & SERVICE CO., INC.
92 Steamwhistle Drive • Ivyland, P A 18974 • USA
Phone: 215-357-3500 • Fax: 215-357-9193
MODEL: __________________________________
MAX. PRESSURE: _________________________
SERIAL NO.: ______________________________
YEAR: ___________________________________
954 MCM
ACSR
REL-954RC Manual 09-12
WARNING
All information found in this guide
must be read and understood before
use or testing of this tool.
Failure to read and understand these warnings
and safe handling instructions could result in
severe personal injury and or death.
NOTICE
Sizes, weights and tool
specifications listed in
this manual are subject
to change without notice.
Please consult factory for
information and updates.
1
Lopper Style
Cutting Jaw
Advertisement
Related Manuals for Reliable Equipment REL-954RC
Summary of Contents for Reliable Equipment REL-954RC
- Page 1 Failure to read and understand these warnings and safe handling instructions could result in severe personal injury and or death. RELIABLE EQUIPMENT & SERVICE CO., INC. 92 Steamwhistle Drive • Ivyland, P A 18974 • USA NOTICE Phone: 215-357-3500 • Fax: 215-357-9193...
- Page 2 DISTRIBUTED BY REGISTRATION UPON RECEIPT OF THIS TOOL, COMPLETE THE REGISTRATION BELOW. COMPANY _____________________________________________________________ ADDRESS _____________________________________________________________ ________________________________________________________________________ PHONE _______________________ FAX____________________________________ SERIAL NUMBER _______________________________________________________ DATE OF PURCHASE ___________________________________________________ DEALER NAME _________________________________________________________ The information in this manual is intended to guide the user in the use and application of this tool.
- Page 3 TABLE OF CONTENTS DISTRIBUTOR INFORMATION ............. 2 REGISTRATION ..................2 TABLE OF CONTENTS ................. 3 TOOL SPECIFICATIONS REL-954RC - S/A REMOTE HYD. CUTTING TOOL ....4 SAFETY INFORMATION AND WARNINGS ........5-9 OPERATING INSTRUCTIONS ............. 10 MAINTENANCE ................... 11 GENERAL MAINTENANCE..............11 MAINTENANCE RECORDS ..............
- Page 4 SPECIFICATIONS remote hydraulic cable cutters are ideal for cutting individual conductors or communication cable. System The REL-954RC will cut individual copper to 1.25 in. Jaw Opening 500 MCM, all-aluminum conductors, and ACSR Force @ 10,000 psi (690 bar) 17,720 lb.
- Page 5 BEFORE USING THIS TOOL, READ THE WARNINGS and the recommended practices described in this manual. Failure by the operator to read and fully understand these warnings will leave this person unqualified to use and operate this tool. Property damage, severe personal injury, and/or death could result by not following these warnings.
- Page 6 RELIEF PRESSURE, OR BACK PRESSURE. WARNING Failure to observe warnings could result in tool damage or injury . IF YOU HAVE ANY QUESTIONS REGARDING THE SAFE USE AND/OR OPERATION OF THIS TOOL, CONSULT YOUR AREA SUPERVISOR, OR CONTACT RELIABLE EQUIPMENT AT 800-966-3530...
- Page 7 HOSES AND FITTINGS There exists the potential for shock in using anything other than certified nonconductive hoses and hydraulic oil with dielectric properties, when using system components near energized WARNING electrical lines. Failure to recognize these conditions could cause electrocution. Hoses and fittings used with this tool must comply with S.A.E.
- Page 8 For your own safety, ensure that you fully comply with all safe WARNING operation guidelines required by your employer. IF YOU HAVE ANY QUESTIONS REGARDING THE SAFE USE AND/OR OPERATION OF THIS TOOL, CONSULT YOUR AREA SUPERVISOR, OR CONTACT RELIABLE EQUIPMENT AT 800-966-3530...
- Page 9 FAILURE TO HEED THESE WARNINGS COULD RESULT IN PROPERTY DAMAGE, SERIOUS PERSONAL INJURY OR DEATH. IF YOU HAVE ANY QUESTIONS REGARDING THE PROPER USE AND/OR OPERATION OF THIS TOOL, CONSULT YOUR AREA SUPERVISOR, 800-966-3530 OR CONTACT RELIABLE EQUIPMENT AT...
- Page 10 Read entire manual prior to using this tool. Refer to all safety cautions and warnings. Observe all safety precautions and procedures required by the operating company (Also refer to SAFETY information found on pages 5 through 10) REL-954RC SCISSOR TYPE CUTTING HEAD...
-
Page 11: Daily Maintenance
When assembling or disassembling O-rings, use hydraulic fl uid as a lubricant to help disassembly or installation. When disposing of hydraulic parts or components observe all federal, state, and local guidelines. IF YOU HAVE QUESTIONS REGARDING THE REPAIR AND MAINTENANCE 800-966-3530 OF THIS TOOL CONTACT RELIABLE EQUIPMENT AT... - Page 12 Date Parts or Service Required If you have any questions regarding the information found in this manual please contact RELIABLE EQUIPMENT at the address, phone or fax numbers shown below. 92 Steamwhistle Drive Ivyland, P A 18974 Phone: 800-966-3530 Fax: 215-357-9193...