Audio Connections - Bugera 1960 User Manual

8
BUGERA 1960 User Manual
Speaker cabinets
1 x 16
1 x 8
1 x 4
2 x 16
2 x 8
Impedances
BUGERA 1960
Loudspeaker
ouput
Speaker cabinet BUGERA 412H-BK
Connecting a speaker
The illustration below shows a set-up that includes an external effects device
connected to the FX LOOP. Additionally, the speaker signal of the connected box
is picked up with a microphone and routed to a microphone input on a mixing
console. This set-up allows you to play back the signal using a P.A. system and/or
send it to recording equipment.
bugera-amps.com
IMPEDANCE switch
16 8 4
PA loudspeaker
Power ampli er
Main Out
Mixing console
Microphone
Set-up for live playing

Audio connections

The inputs and outputs of the BUGERA amplifier use mono jack connectors.
Unbalanced ¼" TS connector
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
tip
(signal)
¼" mono jack connector
Multitrack recorder
E ects processor
Send Return
Instrument input
Electric guitar