MSI B250M BAZOOKA User Manual page 40

Initiate Graphic Adapter [PEG]
▶
Selects a graphics device as the primary boot device.
[IGD]
[PEG]
▶ Integrated Graphics Share Memory [64M]
Selects a fixed amount of system memory allocated to the onboard graphics. This
item will appear when IGD Multi-Monitor is enabled.
▶ IGD Multi-Monitor [Disabled]
Enables or disables the multi-screen output from integrated graphics and external
graphics card.
[Enabled]
[Disabled]
▶ Intel(R) Thunderbolt [Fully Disabled]
▶ Thunderbolt(TM) Support
Enables or disables Thunderbolt™ support.
▶ USB Configuration
Sets the onboard USB controller and device function. Press <Enter> to enter the sub-
menu.
▶ USB Controller [Enabled]
Enables or disables all USB controller.
▶ XHCI Hand-off [Enabled]
Enables or disables XHCI hand-off support for the operating system without XHCI
hand-off feature. This item will appear when USB Controller is enabled.
▶ Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto]
[Enabled]
[Disabled]
▶ Super IO Configuration
Sets system Super I/O chip parameters including LPT and COM ports. Press <Enter>
to enter the sub-menu.
▶ Serial (COM) Port x Configuration
Sets detailed configuration of serial(COM) port x. Press <Enter> to enter the sub-
menu.
▶ Serial (COM) Port x [Enabled]
Enables or disables serial (COM) port x.
40
BIOS Setup
Integrated Graphics Display.
PCI-Express Graphics Device.
Enables multi-screen function for both integrated and external
graphics cards.
Disables this function.
The system will automatically detect if any USB device is connected
and enables or disables the legacy USB support.
Enable the USB support for legacy operating systems that do not
support USB.
The USB devices are available only for UEFI applications.