Advertisement
E) Now insert the shorter metal tubes from above
into the holes. Please ensure that the tapered
ends are inserted into the holes. The legs and
the tubes can be fastened together securely by
applying a small amount of pressure and by
twisting slightly.
F) Now attach the two plastic crossbars to the
metal tubes so that both left legs and both right
legs are joined to each other. To do this, insert
the crossbar pegs into the tube openings.
G) The plastic shelf and the crossbars provide
enough tension to ensure that the stand is
stable.
H) After you have assembled the stand, place the
BBQ grill unit on the stand using the feet on the
underside of the appliance. Please ensure that
the BBQ grill is not tilted, but is sitting flat.
1. Place the BBQ on a flat, heat-resistant surface
(table, work surface for the table-top grill / floor
for the standing grill).
2. Turn the temperature control to 0, or switch the
On/Off switch to 0, and plug in the appliance.
The operating light will appear.
3. With models JA802 D1, D2 and D3 you can
change the temperature of the BBQ at any
time during grilling by turning the temperature
control (1 = lowest temperature / 5 = highest
temperature).
With model JA802 it is not possible to adjust the
temperature. Click the switch to "I" to turn the
appliance on.
4. Depending on the food to be cooked, food can
be placed directly onto the grill when it is not
yet hot, or it can be added when the grill has
warmed up. WARNING: When cooking fatty
foods, it is possible that fat or water may spray
out of the food. Danger of burning.
5. Dripping fat / water is collected in the fat
collection tray below the heating element. TIP:
Before using the appliance, add a small amount
of water to the fat collection tray (the base of
the tray should only be lightly covered), as
this will make it easier to remove the fat after
cooking.
6. When you have finished, turn the temperature
control to the lowest level ("1") and then
remove the plug.
30059-English_2.indd 15
Warning:
Before cleaning the appliance, always remove the
plug from the plug socket and leave the appliance
to cool completely.
• During cleaning, the appliance, power cable
and plug must not be submerged in water or
other fluids. These can be cleaned with a dry
cloth.
• If very dirty, the outside of the appliance can be
washed carefully with a damp cloth and then
dried thoroughly. Use a mild detergent. Please
ensure that no moisture can reach the inside of
the appliance.
• Do not use any abrasive substances, abrasive
sponges or strong detergents, as these can
damage the surface of the appliance.
• Clean the appliance regularly after each use in
order to remove fatty marks completely.
• Never use solvents or petrol for cleaning.
15/1/07 4:05:32 PM
Advertisement
