Advertisement
1. Grill
2. Plastic handle
JA802 D1, D2, D3: with plug connector for
temperature control
3. Heating coil (depending on the model, this can
be visible or firmly attached to the grill from
below)
4. Temperature control for JA802 D1, D2, D3
On/Off switch for JA 802
5. Fat collection tray
Except model JA802 D3 (Free-standing BBQ
grill)
6. Metal tubes (only free-standing BBQ grill JA802
D3)
7. Plastic shelf (only free-standing BBQ grill JA802
D3)
8. Metal tubes with plastic feet
(only free-standing BBQ grill JA802 D3)
NOTE:
For the standing BBQ (Model JA802 D3 / Item
number 10000192) first assemble the BBQ legs as
described below in points A - H.
1. Remove all appliance parts from the packaging
and remove all padding material and inserts.
2. Clean your table-top BBQ grill in order to
remove any possible dirt left over from the
manufacturing process.
A) Remove all appliance parts from the packaging
and remove all padding material and inserts.
B) First place the plastic shelf on a stable and flat
surface (table, work bench, floor) with the flat
and smooth side facing upwards.
C) Insert the longer metal tubes with plastic feet
into holes on the plastic shelf so that the ends
without the plastic feet are attached to the shelf.
Do the same for all four legs.
D) Turn over the shelf and legs and stand it on its
legs..
30059-English_2.indd 14
15/1/07 4:05:32 PM
Advertisement
