Advertisement
Quick Links
Advertisement
Related Manuals for Malekko Charlie Foxtrot
Summary of Contents for Malekko Charlie Foxtrot
- Page 2 Charlie Foxtrot is a digital buffer/granular pedal with both auto- capture and manual-capture of the input signal. Playback and capture manipulated through several parameters: six knobs control the size of the buffer, duration of repeats, pitch mode, threshold, mix, and preamp level. Any combination of Size,...
-
Page 3: Controls And Connections
CONTROLS AND CONNECTIONS 1. 9VOLT DC POWER JACK - only for use with standard 2.5mm neg-tip 200mA 9volt DC power supply. 2. STOMP SWITCH - Turns effect on or off. Also used to assign expression/cv control and assign filter type selection. 3. - Page 4 EXPRESSION PEDAL AND CV CONTROL 1. With the effect on, hold down the stomp switch. 2. While holding the stomp switch down, turn any (or a combination of all) of the following controllable effect knobs: BUFFER/GRAIN SIZE, DURATION, PITCH MODE and THRESHOLD. This will activate assignment to expression or cv control.
- Page 5 REMOVING AN EXPRESSION PEDAL AND CV CONTROL ASSIGNMENT 1. Hold down the stomp. 2. With the stomp down, turn the knob with the assigned setting to 12 o’clock. 3. Release the stomp. Now that parameter is no longer assigned to the EXP/CV control and it is in manual mode.
-
Page 6: Basic Operation And Safety
Connect to an industry standard 9 Volt DC power supply!Incorrect voltage and AC power supplies will damage your pedal and void the manufacturer’s warranty! We also recommend using our Malekko 9 Volt Wall Wart, available through our website. 2. Do not use this apparatus near water. -
Page 7: Warranty
– such as, but not limited to, power cables connected backwards, excessive voltage levels, or exposure to extreme temperature or moisture levels. The warranty covers replacement or repair, as decided by Malekko Heavy Industry. Please visit website malekkoheavyindustry.com...