Table of Contents
Advertisement
1. SaFetY inStruCtionS
1.3 Safety instructions From the Manufacturer
1.3.4 Warning
be Prepared
•
Before using this product, read and understand the
instructions.
•
All work must be performed by qualified personnel
trained in the proper application, installation, and
maintenance of equipment and/or systems in
accordance with all applicable codes and ordinances.
•
When handling electronic components and boards,
always use proper Electrostatic Discharge (ESD)
equipment and follow the proper procedures
•
Make sure that all necessary safety precautions have
been taken.
•
Provide for proper ventilation, temperature control,
fire prevention, evacuation, and fire management.
•
Provide easy access to the appropriate fire
extinguishers for your product.
•
Consult with your local fire department, state, and
local codes to ensure adequate preparation.
•
Read this manual as well as all the literature provided
in your owner's packet.
•
Save these instructions for future reference.
•
Failure to follow the instructions set forth in this
publication could result in property damage, personal
injury, or death from fire and/or explosion, or other
hazards that may be associated with this type of
equipment.
Safely evacuate Piping System
Before disassembly of any meter or accessory
component:
•
All internal pressures must be relieved and all liquid
drained from the system in accordance with all
applicable procedures.
•
Pressure must be 0 (zero) psi.
•
Close all liquid and vapor lines between the meter
and liquid source.
For Safety Rules, refer to local authorities and relevant
NFPA Codes.
Failure to follow this warning could result in
property damage, personal injury, or death from
fire and/or explosion, or other hazards that may be
associated with this type of equipment.
LCI40
Series IOM
1.3.5 notice
This manual provides warnings and procedures that
are intended to inform the owner and/or operator of the
hazards present when using the Liquid Controls Meter
on LP-Gas and other products. The reading of thee
warnings and the avoidance of such hazards is strictly
in the hands of the owner-operators of the equipment.
Neglect of that responsibility is not within the control of
the manufacturer of the meter.
1.3.6 Publication updates and translations
The most current English version of all Liquid Controls
publications are available on our Web site, www.
lcmeter.com. It is the responsibility of the local
distributor to provide the most current version of Liquid
Control manuals, instructions, and specification sheets
in the required language of the country or the language
of the end user to which the products are shipping. If
there are questions about the language of any Liquid
Controls manuals, instructions, or specification sheets,
please contact you local distributor.
WWW.LCMETER.COM
7
Advertisement
Table of Contents
