Troubleshooting - Swann MicroCam HD Security Camera Instruction Manual

Troubleshooting

I don't see an image on the DVR or TV.
• Check that all cables are properly connected and secure; connections may
be loose. Make sure that the MicroCam is being supplied power from the
included power adapter.
• If the MicroCam is connected to your TV, make sure that the appropriate
video input option is selected on your TV (consult your TV manual for
further assistance with selecting the correct A/V connection) and the
MicroCam's push-button switch is in the depressed ("IN") position which
sets the camera to 960H video mode, enabling the camera to output video
to your TV.
I can't see anything at night.
The MicroCam is designed for daytime use only. It does not have built-in
infrared capabities.
The image is blurry.
The MicroCam has already been pre-focussed at the factory. If, by the slight
chance, you find the image blurry, you can manually adjust the focus of the
lens by following the steps below:
1. Slightly loosen the screw securing the lens bezel of the camera.
2. Using a straightened paper clip or the tip of a pen, carefully rotate the
bezel until the camera's live view image doesn't look blurry anymore.
3. Once the desired focus is obtained, tighten the screw to secure the
lens bezel.
Having problems?
We are here to help! Visit us at http://support.swann.com. You will find
all the answers to the most frequently asked questions. If you would like
to reach us by email or phone, our technical support contact details are
available on the back of this manual.
6
Notes
7