Samsung GALAXY TAB SC-01C Instruction Manual page 124

Trouble
No caller ID is notified/A
notified caller ID is different
from that of the caller/
Functions for using
contents saved in
phonebook or those using
Caller ID notification do not
operate.
Data transfer is not
performed.
Data saved in microSD
card is not displayed.
Image is not displayed.
Bluetooth device is not
found even if scanning is
performed.
The FOMA terminal
operation is slow/The
operation of program is
unstable/Cannot activate
some program.
122
Check and remedy
• Even when a caller notifies the caller ID, it is
not displayed on the FOMA terminal unless
notified from the network or network
operator used. And, a notified caller ID may
be different from that of the caller by some
networks or networks operators you use.
• Do you use USB hub? When USB hub is
used, the terminal may not be operated
correctly.
• Remove and attach microSD card. ➝ P.20
• If it is unsupported image data,
• The Bluetooth device (commercial item) is
needed to be in registration stand-by state.
If you register the device again after deleting
the registration, delete the registrations on
both Bluetooth communication device and
the FOMA terminal, and then perform
registration of the devices.
• Check the usage state of the FOMA
terminal phone memory and exit the
running program etc. to make rooms of
memory. ➝ P.34
Trouble
Data is not displayed
correctly/Cannot operate
the touch screen correctly.
Cannot cancel the screen
lock
Cannot connect to the
network.
The FOMA terminal does
not respond and cannot
operate.
An error message appears
when activating Camera.
appears.
Check and remedy
• Try "Factory data reset". (P.105)
• Do you set unlock pattern for the screen
lock/PIN/password? ➝ P.37
• Do you use in radio wave weak area?
➝ P.26
p
• Press for 8-10 seconds. The terminal
restarts automatically. Even if the terminal is
restarted, the trouble is not resolved, try
"Factory data reset" (P.105).
• Check the battery level. ➝ P.20
• Check the memory space.
• Restart the FOMA terminal.