Table of Contents
Advertisement
4.4
Service mode
Power ON.
Keep this state more than 3 seconds while continuing
pressing the [MENU] button and [
Exchanging it operate a menu of service mode with the [FF] button and [REW] button.
Operate choice of a menu with a [ENT] button.
The unit enters the service mode.
"INIT" is
indicated on the LCD.
"VERSION" is
indicated on the LCD.
"AREA/RGN" is
indicated on the LCD.
"VIDEO" is
indicated on the LCD.
"CLR ERR" is
indicated on the LCD.
"CD ERROR" is
indicated on the LCD.
"DVD-TEMP" is
indicated on the LCD.
"SYS-TEMP" is
indicated on the LCD.
"CHK MODE" is
indicated on the LCD.
"RUNNING" is
indicated on the LCD.
"MEMCHECK" is
indicated on the LCD.
] button sequentially.
Press the [ENT] button
Initialize user set data
: The system control EEPROM is initialized except
for The loading/ejection error history.
Press the [ENT] button
Micon version display
S-XXX-YY
DVD-XXX
*Exchanging it operate each indication with the
[FF] button and [REW] button.
Press the [ENT] button
Destination area/region display
SYS-XX
DVD-AXX
DVDRGN X
*Exchanging it operate each indication with the
[FF] button and [REW] button.
Press the [ENT] button
Setting of NTSC or PAL
"NTSC" or "PAL" are indicated on the LCD.
*Exchanging it operate each indication with the
[FF] button and [REW] button.
Note:
There is the model that is not equipped with
this mode by a version.
Press the [ENT] button
Clear loading/ejection error history
:The error history stored in the EEPROM is cleared.
Press the [ENT] button
Read loading and ejection error history
:The error history saved in the system control
is read and displayed.
TOT-XXXX
Enyyzzzz
0nyyzzz
Press the [ENT] button
Thermistor's temperature data readout
: Data in the temperature sensor in the DVD unit
is read every 5 seconds and displayed in hex numbers.
Press the [ENT] button
Thermistor's temperature data readout
: Data in the temperature sensor in the system control
is read every 5 seconds and displayed in hex numbers.
Press the [ENT] button
DVD unit check mode
(See section "DVD check mode" for details.)
Press the [ENT] button
Running mode : For use in running tests.
Press the [ENT] button
Memory check
: The remaining data capacity of the disc is displayed on the LCD.
System control CPU version/
ROM correction version
DVD version
System control destination
DVD unit destination
DVD unit region
: Total error count.
(A figure between 0 and 9999 is displayed.
10000 or more is also displayed as 9999.)
: Latest three error history
n: Counter
yy: Error code
zzzz: Detailed error code
: First five error history
n: Counter
yy: Error code
zzzz: Detailed error code
*Exchanging it operate each indication with the
[FF] button and [REW] button.
(See section "Error code tables" for details.)
(No.MA437<Rev.003>)1-17
Advertisement
Table of Contents
