3.2.2 Removing the Front end board (See Fig.7)
(1) Remove the Motor wires from loading motor soldered to
TP79
and
TP81
of the Front end board.
(2) Remove the two screws B attaching the Front end board.
B
3.2.3 Removing the Loading arm assembly (See Fig.8)
(1) Remove the Loading arm spring L from Loading arm assembly.
(2) Slide to left side and then disengage hook a then hook b.
b
hook
3.2.4 Removing the Gear base assembly (See Fig.9, 10)
(1) Remove the Loading arm spring L. (See Fig.9)
(2) Remove the two screws C attaching the Gear base assembly.
(See Fig.10)
TP81
TP79
B
Fig.7
Loading arm
assembly
hook
Loading arm spring L
Fig.8
Loading arm
spring L
C
a
3.2.5 Removing the Loading arm holder. (See Fig.11)
(1) Remove the two screws D attaching the Loading arm holder.
(2) Remove the Loading arm spring R.
Loading arm
holder
Fig.9
Fig.10
D
Loading arm
spring R
Fig.11
(No.MA437<Rev.003>)1-13