Turning Off The Av Source; Turning Off The Screen; Adjusting The Volume; Attenuating The Sound - JVC KW-V140BT Instruction Manual

Basic Operations Basic Operations

Turning off the AV source

1
Display the source/option selection
screen.
On the Home screen, touch as follows:
2
Turn off the AV source.
On the source/option selection screen, touch as
follows:

Turning off the screen

KW-V140BT KW-V340BT
KW-V240BT
(Hold) (Hold)
To turn on the screen: Press and hold
monitor panel or touch the screen.
4 ENGLISH

Adjusting the volume

KW-V140BT
KW-V240BT
You can adjust the volume (00 to 35) by pressing + to
increase and pressing – to decrease.
• Holding + increases the volume continuously to
level 15.

Attenuating the sound

(Only for KW-V340BT)
On the source control screen, touch as follows:
[ ] becomes blue.
on the
To cancel attenuation: Touch [
becomes white.)
KW-V340BT
] again. ([ ]

Getting Started

Getting Started

Initial settings

When you power on the unit for the first time or reset
the unit, the <Initial Settings> screen appears.
Perform the initial settings.
Initial Settings
Demonstration
ON OFF
Language
English
Rear Camera
Enter
User Customize
Enter
Viewing Angle Enter
E.g. Initial settings screen for KW-V240BT
Once completed, Home screen appears.
<Demonstration>
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
Finish