Installing The Unit; Removing The Unit - JVC KW-V140BT Instruction Manual

Installation and Connection Installation and Connection

Installing the unit

Installing the unit using the mounting
bracket removed from the car
π / [
Note: Select the appropriate screws (supplied) for the
mounting bracket.
Installing the unit using the mounting
sleeve
(Only for KW-V240BT Region 4)
]
Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
Installing the trim plate
(Only for KW-V240BT Region 4)
π / [
Car bracket

Removing the unit

(Only for KW-V240BT Region 4)
1
Engage the catch pins on the extraction
keys ( \ ) and remove the two locks on the
lower part of the trim plate (
2
'
3
' ).
Catch
Lock
\
Remove from the upper two catches of
the trim plate ( ' ).
The frame can be removed from the top side in the
same manner.
Remove the unit by inserting the two
extraction keys ( \ ), then pulling them as
illustrated.
\
Be careful to avoid injury from the catch pins on
the extraction key.
ENGLISH 53