Kyocera Hydro WAVE Quick Start Manual page 27

of the cover. The charger/USB port and headset jack port
do not have covers because they are waterproof.
● Do not spray or immerse your phone in liquids other than
fresh water or tap water.
● Do not expose your phone to water heated in excess of
104°F (40°C), or to liquids other than water, such as
detergent, beverages, or chlorinated or treated water.
Should your phone be accidentally exposed to other
liquids, rinse the phone gently in clean fresh water.
● The touch panel and touch keys will not operate when the
phone is wet.
● Your phone is inoperable under water and should be dried
as quickly as possible when wet.
● Do not use the charger/USB port for charging, data
transmission, etc. until the phone is completely dry.
If your phone gets wet:
Water lodged in the headset jack may cause the phone to
falsely detect an inserted headset (in which case the
loudspeaker and/or earpiece audio will be disabled) until the
water is removed. Water in the microphone port may affect
outbound audio quality. These are temporary conditions and
will subside once the phone is dry.
1. Do not open the SIM/microSD card holder cover as
this may allow water to get inside the sealed portion
of the phone.
2. Wipe the phone surfaces with a dry clean cloth.
3. Water in the phone's open ports may affect sound
quality and should be removed with puffs of air directly
into the ports. Phone audio may not operate properly
until ports are dry. Apply a dry clean cloth to the open
areas and crevices to remove the moisture left on the
phone: microphones; speakers; power button; volume
button; headset jack; and charger/USB port.
4. Repeat the process until the phone is completely dry.
Important Safety Information 27