Kyocera Hydro WAVE Quick Start Manual page 15

Activate the Mobile HotSpot
1. From the Home screen, tap Apps
> More > Tethering & Mobile HotSpot.
Tip: You can also access this feature by tapping Apps
> Mobile HotSpot
2. Tap the ON/OFF switch next to Mobile HotSpot to
turn it on.
3. Tap Mobile HotSpot settings > Configure Mobile
HotSpot.
4. Edit the Network name filed and then create a new
Network SSID name.
5. Verify the Security field is set to WPA2 PSK.
6. Enter a new password then write it down.
7. Select the Broadcast network name (SSID) check
box if you would like to broadcast your SSID name to
nearby devices.
> Settings
from the Home screen.
8. Tap SAVE to store the new settings.
9. Confirm the Mobile HotSpot active icon appears at the
top of the screen.
Note: By default, during the initial setup process, the
connection is not secure. It is recommended that
you maintain a secure connection by using a
password for communication.
Note: Using your 4G service and Mobile HotSpot drains
your phone's battery at a much faster rate than
when using any other feature combination. The best
way to keep using the phone as a HotSpot is to have
it connected to a power supply.
Change the Mobile HotSpot Password
1. From the Home screen, tap Apps
> More > Tethering & Mobile HotSpot.
2. Tap Mobile HotSpot settings > Configure Mobile
HotSpot.
> Settings
Get Started 15