Related Manuals for Jensen Heavy Duty
Summary of Contents for Jensen Heavy Duty
- Page 1 JHD916BT AM/FM/RBDS/WB/USB/AUX-IN/BT/SiriusXM-Ready Heavy Duty Radio Installation and Operation Manual...
-
Page 2: Table Of Contents
JHD916BT CONTENTS Introduction ..........................1 Safety Information ........................2 Installation ............................ 3 Wiring ............................3 Basic Operation ........................... 5 Tuner Operation ........................... 7 USB Operation ..........................9 SiriusXM Radio Operation ......................10 ® iPod Operation ......................... 14 Bluetooth Operation ........................15 Care and Maintenance ....................... -
Page 3: Introduction
INTRODUCTION Content List System Features Jensen Heavy Duty Radio Hardware Kit Features of Jensen JHD916BTmobile audio system include: Mounting Bracket Full Dot Matrix LCD 1/8” Auxiliary Cable AM/FM US/ Turkey/ Italy/ Brazil Tuner with 12 Presets (6AM, 6FM) Quick Reference Guide ... -
Page 4: Safety Information
JHD916BT SAFETY INFORMATION When Driving Keep the volume level low enough to be aware of the road and traffic conditions. When Washing Your Vehicle Do not expose the product to water of excessive moisture. Moisture can cause electrical shorts, fire or other damage. When Parked Parking in direct sunlight can produce very high temperatures inside your vehicle. -
Page 5: Installation
JHD916BT INSTALLATION Mounting the Headphone Bracket Mounting the Bracket Three options are provided for mounting the bracket (self-tapping screws, machine screws with nuts or double-sided tape) to ensure a mounting option ideal for your mounting location. Two options are provided for mounting the bracket (self-tapping screws or machine screws with Alternately, the headphone can be mounted directly to the instrument panel if access to the rear nuts) to ensure a mounting option ideal for your mounting location. -
Page 6: Wiring
JHD916BT WIRING Color Description 50 ohm BT Antenna Cable Blue AMP Remote (+12VDC 500MA) Black Ground +12V DC SWITCHED Gray Right Speaker (+) Gray/Black Right Speaker (-) White Left Speaker (+) White/Black Left Speaker () Black Black Headphone out Black Aux-In WARNING! Black... -
Page 7: Basic Operation
JHD916BT BASIC OPERATION Reset The reset button (12) should be activated for the following reasons: Initial installation of the unit when all wiring is completed Function buttons do not operate Error symbol on the display Use a ball point pen or thin metal object to press the reset button. This may be necessary should the unit display an error code. -
Page 8: Setting The Clock
JHD916BT Press the ▲ or ▼ buttons (8, 11) to adjust the selected digit. Liquid Crystal Display (LCD) Rear AUX Enable (On/ Off) Preset-Only Tuning (On / Off) The current frequency and activated functions are shown on the LCD panel. ... -
Page 9: Tuner Operation
JHD916BT TUNER OPERATION NOTE: Preset buttons are pre-assigned frequencies in weather band mode. Automatically Store / Preset Scan (AS/PS) Automatically Store Select an AM or FM band. Press and hold the AS/PS button (13) for more than 2 seconds to automatically select 6 strong stations. - Page 10 JHD916BT Weather Band Operation surrounding conditions, weather, obstructions of the signal by hills or mountains, etc. NOAA Weather Alert What is the NOAA Weather Radio/Weatheradio Canada? The Weather Alert function adds an additional level of user safety by automatically switching NOAA (National Oceanic and Atmospheric Administration) is a nationwide system that from any of the available function modes to weather band for a minimum of 60 seconds if a broadcasts local weather emergency information 24 hours a day via the National Weather...
-
Page 11: Usb Operation
JHD916BT USB OPERATION Previewing Tracks Press the 1/INT button to play the first 10 seconds of each track in the current folder sequentially. Press 1/INT again to stop Intro Scan and resume normal play at the current track. Repeat Play ... -
Page 12: Siriusxm Radio Operation
JHD916BT SIRIUSXM RADIO OPERATION Channel Up/Down Tuning Press the ◄◄ or ►► buttons (17, 10) to search for a channel. Press and hold the ◄◄ or ►► buttons to fast search. Direct Tuning Mode Press and hold the INFO/ENTER button to enter direct tuning mode. Press ◄◄... -
Page 13: Channel Lock
JHD916BT Satellite Signal Strength Reset SiriusXM Channel Lock Code The display will indicate satellite reception strength as shown below. If you forget your Parental Control lock code, use the following directions to reset the code to the default “0000”. Resetting the lock code will not affect the locked channels list. In SiriusXM mode, tune to CH-0 Signal Strength Strength Display... - Page 14 JHD916BT Advisory Messages Reported by the SiriusXM Vehicle Tuner On-Screen Display Advisory Message Cause Explanation/Solution Verify that the antenna cable is connected to the SiriusXM Check Antenna Check Antenna The radio has detected a fault with the SiriusXM antenna. The antenna cable is either disconnected or damaged.
- Page 15 JHD916BT On-Screen Display Advisory Message Cause Explanation/Solution Chan Locked Channel Locked The channel that you have requested is Locked by the radio See the section on Parental Control, page 11 for more information Parental Control feature. on the Parental Control feature and how to access locked channels. Enter Code: _ _ _ _ Enter Lock Code User prompted to enter the lock/unlock code.
-
Page 16: Ipod ® Operation
JHD916BT IPOD OPERATION ® Turning the iPod On/Off The iPod power turns on automatically when it is connected to the front panel USB port, as long as the vehicle ignition is turned on. You can turn the iPod off by disconnecting it or by turning the ignition off. -
Page 17: Bluetooth Operation
JHD916BT BLUETOOTH OPERATION The devices are stored in FIFO (First in First Out) order. To prevent a device from being bumped from the list when more than 5 devices are used, you must lock the device. To lock/Unlock a device, press the INFO/ENTER button to display/change The JHD916BT includes built-in Bluetooth technology that allows you to connect this head unit the Locked or Unlocked icon. - Page 18 JHD916BT PAUSE” will appear on the LCD. Press ►|| again to resume playback. If you change to another mode, the mobile phone audio will pause. Press the MODE (3) button to return to Bluetooth mode and resume mobile phone audio playback. NOTE: If a Bluetooth device is disconnected due to the power being turned off or if the device is disconnected inadvertently, the unit will automatically search for the matching Bluetooth device when the power is restored.
-
Page 19: Care And Maintenance
JHD916BT CARE AND MAINTENANCE TROUBLESHOOTING Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Symptom Cause Solution Keep the product away from dust and dirt, which can cause premature wear of parts. The vehicle’s accessory No power If the power supply is properly... -
Page 20: Specifications
JHD916BT SPECIFICATIONS FCC Notes WARNING! Changes or modifications to this unit not expressly approved by the party Signal to Noise Ratio............> 60 dB responsible for compliance could void the user’s authority to operate the equipment. - Page 21 ASA Electronics Corporation www.asaelectronics.com www.jensenheavyduty.com ©2017 ASA Electronics Corporation v.300817...