Part Names - Onkyo TX-8220 Instruction Manual

> Before Start > Part Names

Part Names

Part Names

Front Panel
1. Í ON/STANDBY button
2. MEMORY button: Used to register DAB (European models)/AM (North American
models)/FM radio stations (P18).
3. TUNING/PRESET button: Switch between the TUNING mode, where you select a
frequency to tune to a station, and the PRESET mode, where you select a preset station.
4. Remote control sensor: Receives signals from the remote controller.
0 The signal range of the remote controller is within about 16y/5 m, at an angle of 20° on
the perpendicular axis and 30° to either side.
5. 2/- , +/1 buttons: Use to tune to DAB (European models)/AM (North American models)/
FM radio stations and select preset numbers.
6. Display (P5)
7. SPEAKER A/B button: Select the terminals to output audio from between SPEAKERS A/
4
> Install
   
 
> Playback
  
 
B.
8. DIRECT/TONE button: Switches between the DIRECT mode which outputs pure sound
as it was intended, and the TONE mode which enables adjustments to the BASS and
TREBLE.
9. Bluetooth indicator: Lights when the unit is connected by BLUETOOTH. It will flash during
pairing or if the connection is not correct.
10.DISPLAY button: Switches the information on the display.
11. VOLUME
12.PHONES jack: Connect stereo headphones with a standard plug (Ø1/4z/6.3 mm).
13.INPUT buttons: Switches the input to be played. The input changes BD/DVD
LINE TV
button.
14.BASS buttons: Adjusts the bass.
15.TREBLE buttons: Adjusts the treble.
 

TUNER PHONO BLUETOOTH
Setup | Others

CBL/SAT
CD each time you press the 1