Onkyo TX-8220 Instruction Manual page 10

> Before Start > Part Names
Turntable
a Analog Audio Cable
10
> Install > Playback
a
2. AUDIO IN connection
Connect an other external device with an analog audio
cable. You can connect a turntable that has an MM-type
cartridge to the PHONO jack.
0 If the turntable has a built-in audio equalizer, connect it to
an AUDIO IN jack other than the PHONO jack. Also, if
the turntable uses an MC type cartridge, install an audio
equalizer compatible with the MC type cartridge between
the unit and the turntable, then connect to any AUDIO IN
jack other than the PHONO jack.
If the turntable has a ground wire,
connect it to the GND terminal.
CD
Setup | Others