Controls And Displays; Front Panel - Pioneer VSX-9130TXH-K Operating Instructions Manual

Controls and displays

Chapter 4:
Controls and displays

Front panel

1 2 3
STANDBY/ON
INPUT
SELECTOR
11
AUTO SURR/
STREAM DIRECT
PHONES
MULTI-ZONE
CONTROL
13
1 INPUT SELECTOR dial
Use to select an input source.
 STANDBY/ON
2
Switches the receiver between on and standby. Power
indicator lights when the receiver is on.
3 Remote sensor
Receives the signals from the remote control (see
Operating range of remote control unit on page 26).
PHASE CONTROL indicator – Lights when the Phase
4
Control is switched on (page 12).
ADVANCED MCACC indicator – Lights when one of
the MCACC presets (page 33) is selected.
DIGITAL PRECISION PROCESSING indicator –
Lights to indicate digital processing (for example, it
disappears when Pure Direct (page 33) is on, or when
listening through the multichannel analog inputs).
Note
1 The MCACC indicator does not light when the MCACC preset memory currently being selected has not been corrected with Acoustic Calibration EQ
Professional or when EQ is set to OFF in the Audio parameter menu (see Setting the Audio options on page 73).
PHASE ADVANCED
CONTROL MCACC
DVD BD TV SAT DVR 1/DVR 2 VIDEO
AUTO SURR/ HOME STANDARD ADVANCED STEREO/
STREAM DIRECT THX SURROUND SURROUND A.L.C.
PHONES
MULTI-ZONE
– +
CONTROL ON/OFF SPEAKERS ST ST
12
HOME STANDARD ADVANCED STEREO/
THX SURROUND SURROUND A.L.C.
– +
ON/OFF SPEAKERS ST ST
14 15
1
4
DIGITAL PRECISION DIGITAL VIDEO
PROCESSING SCALER HDMI
HDMI 1/HDMI 2 CD/CD-R FM/AM XM/SIRIUS iPod USB
VIDEO INPUT
iPod DIRECT
VIDEO L AUDIO R DIGITAL IN USB
7 8 9
DIGITAL VIDEO SCALER indicator – Lights when
Resolution is set to a setting other than PURE (for
example, when the video input signal is upscaled)
(page 73).
HDMI indicator – Blinks when connecting an HDMI-
equipped component; lights when the component is
connected (page 67).
5 MULTI CH IN
Press to select the multichannel analog inputs (page 59).
6 MASTER VOLUME dial
7 Input source buttons
Press to select an input source.
8 VIDEO INPUT
See Connecting a component to the front panel inputs on
page 20.
9 iPod DIRECT USB terminal
Use to connect your Apple iPod as an audio source
(page 52), or connect a USB audio device for playback
(page 54).
5 6
VSX-9130TXH
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
MULTI CH IN
MASTER
VOLUME
MCACC
SETUP MIC
10
04
25
En