Memorizing Stations - Pioneer VSX-609RDS Operating Instructions Manual

Using the Tuner
Memorizing Stations (front panel only)
If you often listen to a particular radio station, it's convenient to have the receiver store the frequency for easy
recall whenever you want to listen to that station. This saves the effort of manually tuning in each time. The
receiver can memorize up to 30 stations, stored in three banks, or classes (A,B and C) of 10 presets each. When
memorizing FM frequencies, the receiver also stores the MPX setting (auto stereo or mono), and RF ATT
settings. The process for memorizing stations is only possible from the controls on the front panel of the
receiver.
3 4 2
Character display used for station name input:
Character
Display
indications
Character
Display
indications
Character
Display
indications
Character
Display
indications
44
En
1 Tune to a station you want to memorize.
See "Finding a Station" and "Tuning Directly to a Station" on pages
42 and 43 for more on how to do this.
2 Press MEMORY.
The display shows a blinking memory class.
3 Press CLASS to select one of the three
classes.
Repeatedly pressing this button cycles through the three available
classes, A, B and C.
4 Press STATION +/– to choose the preset
memory number.
Pressing these buttons repeatedly cycles through the 10 available
preset memories in each class.
After choosing the location you want, the preset class and number
blink for about 5 seconds and the receiver stores the station.
Repeat steps 1 to 4 to memorize up to 30 stations.
A B C D E
P Q R S T
! 0 1 2 3
( ) + ,
*
TUNED
SP A STEREO
F G H I J
U V W X Y
4 5 6 7 8
-
. / : =
K L M N O
Z [ \ ] _
9 " % & '
? @