Battery; Tip; Remote Battery; To Replace The Battery On The Remote - Recon Snow2 User Manual

BATTERY

Snow2 Battery (3.7V Lithium Polymer Rechargeable)
A full charge of the battery of your Snow2 lasts from 5-6 hours, even at temperatures as low as -10°C / 14°F.
Usage under temperatures equal to or below -20°C / -4°F will mean that battery depletion occurs at a faster rate.
Fully Charged Battery
Nearly Fully Charged Battery
Partially Charged Battery
Low Battery
Extremely Low Battery
No Charge Left
Battery is charging via USB to micro-USB cable

Tip:


Preserve battery life on your Snow2 by turning off the display. To do this, open the Quick Nav menu and press
DOWN on your remote to access Power Options then select Display Off.
Note: The battery performance of your Snow2 will vary depending on the amount and / or activity of connected
Bluetooth devices (ex: Smartphone, Third Party Hardware such as POV cameras, Heart Rate Monitors, etc.)
Never attempt to service the Snow2 yourself – this includes attempting to remove or replace the lithium battery.

REMOTE BATTERY

The remote which accompanies your Snow2 connects to the HUD via BLE sensor technology. This is a very low energy
connection, allowing you to navigate your HUD with ease. Please be aware that you may need to replace the remote's
single three-volt CR2032 battery approximately once every three years.

To replace the battery on the remote:

1. Remove the battery cover found on the underside of your remote.
2. Using a coin or flathead screwdriver, turn the cover counter clockwise until you reach the unlock symbol.
3. Remove battery and insert a replacement.
4. Replace the battery cover on the back of the remote.
5. Using a coin or flathead screwdriver, turn the cover clockwise until the arrow aligns with the closed lock symbol.
16 | P a g e