Listening To Your System; Auto Playback; Listening In Surround Sound - Pioneer VSX-516 Operating Instructions Manual

05

Listening to your system

Chapter 5:
Listening to your system
Important
• Certain features explained in this section
will not be possible depending on the
source (for example, PCM 88.2 / 96 kHz,
DTS 96 kHz (24 bit) or WMA 9 Pro sources).

Auto playback

The simplest, most direct listening option is the
Auto Surround feature. With this, the receiver
automatically detects what kind of source
you're playing and selects multichannel or
stereo playback as necessary.
STANDARD ADV.SURR
TOP MENU
• While listening to a source, press
STEREO for auto playback of a source.
Press repeatedly until AUTOSURR. shows
briefly in the display (it will then show the
decoding or playback format). Check the
digital format indicators in the display to see
how the source is being processed.

Listening in surround sound

Using this receiver, you can listen to any
source in surround sound. However, the
options available will depend on your speaker
setup and the type of source you're listening to.
Note
1 • Stereo surround (matrix) formats are decoded accordingly using Neo:6 CINEMA or 2 Pro Logic IIx MOVIE (see Listening
in surround sound above for more on these decoding formats).
• The Auto Surround feature is canceled if you connect headphones or select the multichannel analog inputs.
2 If surround back channel processing (page 24) is switched to OFF, or the surround back speakers are set to NO (page 28), 2
Pro Logic IIx becomes 2 Pro Logic II (5.1 channel sound).
3 When listening to 2-channel sources in Dolby Pro Logic IIx Music mode, there are three further parameters you can adjust:
Center Width, Dimension, and Panorama. See Setting the effect options below to adjust them.
4 With 2-channel sources in Neo:6 Music mode, you can adjust the center image effect (see Setting the effect options below).
22
En
1
CD-R
CD FM AM
MIDNIGHT/
STEREO LOUDNESS
MENU
If you connected surround back speakers, see
also Using surround back channel processing
on page 24.
CD CD-R
STANDARD ADV.SURR STEREO
TOP MENU
• While listening to a source, press STAN-
DARD.
If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding
format will automatically be selected and
2
shows in the display.
With two channel sources, press STANDARD
repeatedly to select from:
• 2 Pro Logic IIx MOVIE – Up to 7.1
channel sound, especially suited to movie
sources
• 2 Pro Logic IIx MUSIC
channel sound, especially suited to music
sources
• 2 Pro Logic IIx GAME – Up to 7.1
channel sound, especially suited for video
games
• 2 PRO LOGIC – 5.1 channel surround
sound
• Neo:6 CINEMA – 6.1 channel sound,
especially suited to movie sources
4
• Neo:6 MUSIC
– 6.1 channel sound, espe-
cially suited to music sources
FM AM
MIDNIGHT/
LOUDNESS
MENU
3
– Up to 7.1