Connecting Antennas; Using External Antennas - Pioneer VSX-516 Operating Instructions Manual

Audio/video multi-channel receiver
Table of Contents

Advertisement

Available languages

Available languages

Connecting up
1
Connect the component video outputs of
your source to a set of component video
inputs on this receiver.
Use a three-way component video cable.
2
If necessary, assign the component video
inputs to the input source you've connected.
This only needs to be done if you didn't connect
according to the following defaults:
• COMP 1 – DVD
• COMP 2 – TV
See Assigning the component video inputs on
page 29.
3
Connect the COMPONENT VIDEO
MONITOR OUT jacks on this receiver to the
component video inputs on your TV or
monitor.
Use a three-way component video cable.

Connecting antennas

Connect the AM loop antenna and the FM wire
antenna as shown below. To improve reception
and sound quality, connect external antennas
(see Using external antennas below).
fig. a
fig. b
5
FM UNBAL
75
1
Pull off the protective shields of both AM
antenna wires.
2
Push open the tabs, then insert one wire
fully into each terminal, then release the tabs
to secure the AM antenna wires.
fig. c
3
AM
LOOP
ANTENNA
4
1
2
3
Fix the AM loop antenna to the attached
stand.
To fix the stand to the antenna, bend in the
direction indicated by the arrow (fig. a) then
clip the loop onto the stand (fig. b).
• If you plan to mount the AM antenna to a
wall or other surface, secure the stand with
screws (fig. c) before clipping the loop to
the stand. Make sure the reception is clear.
4
Place the AM antenna on a flat surface
and in a direction giving the best reception.
5
Connect the FM wire antenna in the same
way as the AM loop antenna.
For best results, extend the FM antenna fully
and fix to a wall or door frame. Don't drape
loosely or leave coiled up.

Using external antennas

To improve FM reception
Use an F connector to connect an external FM
antenna.
F connector
To improve AM reception
Connect a 15–18 foot length of vinyl-coated
wire to the AM antenna terminal without
disconnecting the supplied AM loop antenna.
Outdoor
antenna
15–18 ft. (5–6m)
FM UNBAL
AM
75
LOOP
ANTENNA
For the best possible reception, suspend
horizontally outdoors.
FM UNBAL
AM
75
LOOP
ANTENNA
Indoor antenna
(vinyl-coated wire)
03
13
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vsx-516-k

Table of Contents