Throttle Range Calibration - Hobby King X-Car 120A User Manual

identify the motor type (Sensored/Sensorless) via LED lights
* If the ESC works in Sensored Mode, remove the Sensor wire and the ESC will automatically
change to Sensorless Mode.
Low voltage of the battery
Over-heat of the ESC and motor(95℃)
Sensored motor
Sensorless motor

Throttle Range Calibration

1. Turn on the transmitter, then connect ESC with the battery packs and set the direction of the
throttle channel to REV; set the EPA/ATV value of the throttle channel to 100%.
2. Press and hold the "Set" button and switch on the ESC, release the button when the Blue LED
turn solid. Pull the throttle trigger to full position, Red LED light will flashes and motor beeps
once. when system confirms the position.
3. Push the throttle trigger to full Brake position, Blue LED light will flashes and motor beeps
twice when system confirms the position.
Function LED
Red LED
Blue LED
Red and Blue LED
Blue LED
4
LED Status
Blinking
Blinking
ON
ON