Plug the signal wire into the socket marked with(
)first. Then connect an additional power
(5-12V) to the socket marked with (
). Then switch on the ESC. If the sequence is wrong,
LCD will not work properly.
Note3: The power supply should be lower than 12V, or the program card will be damaged.
Operation:
*Working as an individual device to program the ESC, the function of the buttons are as follows:
"Menu": Change the programmable items circularly;
"Value": Change the parameters of each programmable item circularly
Note: Keeping the "Menu" or "Value" button holding can select the desired parameters quickly.
"Reset": Return to the default settings
14