Related Manuals for ARC InstaTemp MD
Summary of Contents for ARC InstaTemp MD
- Page 1 ® Non-Touch Thermometer User Manual ARC Devices Ltd. Copyright ARC Devices Ltd. 2016 PT-100153-IMD Rev 03...
-
Page 2: Intended Use
If you give this device to another adult, it is vital that you include this user manual. The ARC InstaTemp MD is an ad- justed mode clinical thermometer as per ISO 80601- 2-56. -
Page 3: Key Information
KEY INFORMATION Recommended use: Operate ARC InstaTemp MD in a clinical setting with ambient temperatures ranging from 59-95˚F (15-35˚C). Always protect the sensor, which is in the recess at the top of the device (see illustration on page 4) from shocks or contamination. See Precautions (page 22) and Cleaning (page 25) for more details. -
Page 4: Getting To Know
GETTING TO KNOW The ARC InstaTemp MD ARC InstaTemp MD Infrared Sensor Backlit LCD Display Screen (remove protective label prior to use) Temperature Range Indicator Light Activation Button Hole for tether/wall mount Internal, non-replaceable batteries are included page 4 of 36... - Page 5 GETTING TO KNOW The ARC InstaTemp MD Features Accurate body temperature measured from the forehead in 2.5 seconds LCD screen with backlight for ease of use in low-light conditions Temperature shown in either degrees Fahrenheit (˚F) or degrees Celsius (˚C)
-
Page 6: Device Setup
AFFIX THE WALL MOUNT (optional accessory) While not in use, the ARC InstaTemp MD should be stored using the wall mount. In an operational environment make sure to secure the wall mount away from any direct heating, cooling or ventila- tion systems. -
Page 7: Changing Between Fahrenheit And Celsius
OPERATIONS Changing Between Fahrenheit and Celsius: The ARC InstaTemp MD is set to Fahrenheit by default. To change to Celsius, follow these simple steps: Press and hold the activation button to get a reading, which can be a temperature reading, Lo, Hi or “---”. -
Page 8: Prepare The Patient
Do not touch the lens of the sensor or the area surrounding the front of the device. It is the most delicate part of the ARC InstaTemp MD page 8 of 36... - Page 9 Protect from rain Keep Dry Not to be used in case package is damaged The surface temperature of a human being is sensitive to extreme hot and Caution consult cold temperatures and physical exertion. documents It is important to assess the patient and allow time for the surface temperature to equilibrate to its environment.
- Page 10 OPERATIONS Taking A Temperature 0.5” - 1.25” (1-3cm) Storage and transport temperature Hold for 2.5 seconds Non Sterile STERILE Point the thermometer at the patient, Do not expose to sunlight Keep away without touching them, as shown above. from heat Ensure the device is approximately 0.5-1.25”...
- Page 11 OPERATIONS Hold for 2.5 seconds Storage and transport temperature Non Sterile STERILE Hold the thermometer in position. Press and hold the activation button until the display Do not expose to sunlight is illuminated and a temperature reading Keep away from heat is displayed on the screen.
- Page 12 OPERATIONS Reading the Temperature Indicator The temperature will be displayed for 4 seconds on the display screen. The LCD display will show a tem- perature in ˚F or ˚C. Storage and transport temperature The temperature range indicator will be green, orange or Non Sterile Storage and STERILE...
- Page 13 Do not expose to OPERATIONS sunlight Keep away from heat Understanding the Temperature Range Indicator Color Protect from rain Keep Dry The temperature range indicator will display one of three colors: green, orange, or red. Not to be used in case package is damaged The temperature range indicator...
- Page 14 OPERATIONS Understanding The Temperature Range FAHRENHEIT (˚F) Temperature Range >109.1°F Temp in ˚F ≥100.5⁰F - ≤109.1⁰F Storage and transport temperature Temp in ˚F ≥99.0⁰F - <100.5⁰F Non Sterile Storage and transport STERILE temperature Temp in ˚F ≥96.7⁰F - <99.0⁰F Do not expose to sunlight Keep away...
- Page 15 OPERATIONS Understanding The Temperature Range CELSIUS (˚C) Temperature Range >42.8°C Temp in ˚C ≥38.0⁰C - ≤42.8⁰C Storage and transport temperature Temp in ˚C ≥37.2⁰C - <38.0⁰C Non Sterile Storage and transport STERILE temperature Temp in ˚C ≥36.0⁰C - <37.2⁰C Do not expose to sunlight Keep away...
- Page 16 OPERATIONS Temperature Range “HI” & “LO” A “HI” Reading The LCD will display ‘HI’. This indicates that the temperature which the thermometer has measured is outside the device’s measurement range (i.e. >109.1°F/ >42.8°C). Above 109.1º F / 42.8˚ C A “LO” Reading The LCD will display ‘LO’.
- Page 17 Not to be used in case package is damaged If an Error message is displayed, please Caution consult contact ARC Devices or documents your distributor. Caution consult documents Contact info on page 36 of this document. Lot Code See Base of...
- Page 18 OPERATIONS Other Screen Indications Indication Meaning This indicates an invalid reading. This is due to incorrect usage, such as: • trying to measure a tempera- ture when the ambient tempera- ture is outside the operating temperature range. • an indeterminate reading because the activation button was not held until the display was illuminated.
- Page 19 Steady battery symbol & red indicator light: insufficient Protect from battery power for a Lot Code rain See Base of Keep Dry device measurement. Replace your ARC InstaTemp MD Not to be used in case package is damaged Refer to page 34, Caution consult warranty information.
-
Page 20: Wall Mount
Protect from rain mount with the sensor facing toward the floor. Keep Dry The retractable tether (if included) is provided as means of carrying the ARC InstaTemp MD and Not to be used in case package is keeping the device at ambient temperature. - Page 21 20. Retractable Tether The extending tether is attached by threading the lanyard through the hole in the body of the ARC InstaTemp MD, as shown in the illustration below. The retractable tether can then be attached to a Storage and suitable exterior pocket, waistband or belt.
- Page 22 Not to be used in case package is damaged Note: The ARC InstaTemp MD is recommended to be used in conjuntion with the bladder catheter Caution consult documents thermometer during surgery and 24 hours post-sur- gery. The medication associated with surgery may...
- Page 23 Do not use or store outside or close to a heat or cooling source. Using the ther- mometer in these conditions may affect the accuracy of the temperature reading Do not drop, tap or shake the ARC Insta- Storage and transport temperature Temp MD thermometer.
- Page 24 temperature Do not PRECAUTIONS expose to Protect from sunlight rain Keep away Keep Dry from heat Non Sterile STERILE Not to be used in case package is Do not Protect from expose to damaged rain sunlight Keep Dry Keep away from heat Storage and Do not use in oxygen rich...
- Page 25 It is the most delicate part of the ARC InstaTemp MD thermometer and must be protected from dirt and damage. Do not immerse the ARC InstaTemp MD in water or other liquids. It is not water resistant. Take care not to scratch the lens of the sensor, the display or the housing.
-
Page 26: Troubleshooting
TROUBLESHOOTING Error Codes The table below lists the error codes which the ARC InstaTemp MD can display. If the device continues to display one of these errors, the device should be returned to the manufacturer. Error Code Explanation Sensor Voltage Error... - Page 27 Press the activation button and hold until after the display period is complete. The ARC InstaTemp MD then enters test mode and runs the display test once. During Test Mode, the device behaves as follows: The display turns off for 1 second, then turns on with all segments active.
- Page 28 5. The green and red LEDs will be display alternately. If any of the above steps fail, the device may be faulty and should not be used. Should this occur, please contact ARC Devices customer service (page 35). page 28 of 36...
- Page 29 Avoid oxygen rich environment. DISPOSAL Caution consult documents The ARC InstaTemp MD contains batteries: do not dispose in fire, or domestic waste. Dis- Lot Code See Base of device pose in accordance with local regulations at local authority collection points.
-
Page 30: Icon Identification
ICON IDENTIFICATION This instruction manual belongs to this device. It contains important information about operating the ARC InstaTemp MD non-touch thermometer. Read the instruction manual carefully as non-observance of these instructions can result in inaccurate temperature readings or damage to the device. - Page 31 ICON IDENTIFICATION Device to be disposed of in segregated waste (WEEE Directive 2012/19/EU) Protect from liquids Device conforms with RoHS directive (2011/65/EC) The CE Mark of this device refers to the EC Directive MDD 93/42/EEC 0123 page 31 of 36...
-
Page 32: Technical Specifications
TECHNICAL SPECIFICATIONS Item Value IMD-0388 Model Digital segmented display Display System (LCD) with backlight 89.6 - 109.1°F (32 - 42.8°C) Reported measurement range 59 - 95 °F (15 - 35°C) Operating Operational up to 95% temperature / humidity range humidity non-condensing Storage/ Transport 45°F - 90°F (7°C - 30°C) Temperature range... - Page 33 TECHNICAL SPECIFICATIONS Item Value Contains two AAAA Power supply alkaline batteries, non- replaceable Battery life Approximately 13,000 measurements. Low battery warning displays when approximately 500 measurements left. 1.37” x 0.55” x 5.08” Thermometer (3.5cm x 1.4cm x 12.9cm) Dimensions 1.94 oz (55 gm) Weight Wall Mount &...
-
Page 34: Limited Two-Year Warranty
ARC Devices, and 4) accidents. Shipping cost to return a device to ARC Devices or an ARC Devic- es Service center is not included. A return authorization number must be obtained from ARC Devices prior to returning any products or accessories to ARC Devices’... - Page 35 LIMITED TWO YEAR WARRANTY How to return your thermometer Should service be required during or after the warranty period, you must call ARC InstaTemp MD Customer Service Department to obtain a return authorization number and shipping address. Repackage the thermometer carefully in its original packaging or securely pack to avoid damage during shipping.
- Page 36 CONTACT ARC DEVICES Manufactured and Distributed by: ARC Devices USA, Inc. 1200 N. Federal Hwy, Ste 207, Boca Raton, FL 33432 Phone: +1 (561) 282-6074 E-Mail: info@arcdevices.com Web: www.arcdevices.com EU Authorized Representative Emergo Europe Molenstraat 15 2513 BH The Hague...
Need help?
Do you have a question about the InstaTemp MD and is the answer not in the manual?
Questions and answers