Choosing The Input Signal; Listening To Multichannel Playback - Pioneer Elite VSX-41 Operating Instructions Manual

05 Playing sources

Choosing the input signal

You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.
Press SIGNAL SEL (SIGNAL SELECT) to
•
select the input signal corresponding to the
source component.
Each press switches between AUTO, DVD
7.1ch, ANALOG and DIGITAL. The default is
AUTO.
DVD 7.1ch will only appear when DVD/LD is
selected using the remote or the MULTI JOG/
INPUT SELECTOR dial on the front panel.
When set to DIGITAL, 2 DIGITAL lights when
a Dolby Digital signal is input, and DTS lights
when a DTS signal is input.
• This receiver can only play back
Dolby Digital, PCM (32kHz, 44kHz, 48kHz,
and 96 kHz) and DTS digital signal
formats. With other digital signal formats,
set to ANALOG.
32
En
• You may get digital noise when a LD
or CD player compatible with DTS is
playing an analog signal. To prevent noise,
make the proper digital connections (page
14) and set the signal input to DIGITAL.
• Some DVD players don't output DTS
signals. For more details, refer to the
instruction manual supplied with your DVD
player.
Listening to multichannel
playback
SOURCE
LEARN ERASE
DVD TV
MULTI CONTROL
RCV CD
1
TEST TONE INPUT ATT
4
CH SELECT
7
+10
DTV INFO MPX/RETURN
¶
7
BAND CLASS
1 ¡
TOP MENU AUDIO
REMOTE SETUP STANDARD
INPUT SEL. SIGNAL SEL
RECEIVER CONTROL
TUNE
ST
TUNE
1 Switch on the playback component.
2 Select the source you want to playback.
Use the MULTI CONTROL buttons on the
remote (or MULTI JOG/INPUT SELECTOR dial
on the front panel).
3 Press STANDARD.
If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding format
will automatically be selected and shows in the
display.
RECEIVER
SEARCH BY BRAND
VCR CD-R
TUN TVC
2 3
FL DIMMER
5 6
LEVEL
8 9
EFFECT DISPLAY
DISC
0
ENTER
D.ACCESS T.EDIT/GUIDE
3
8
DTV ON/OFF DTV MENU
4 ¢
SUB TITLE ANGLE
ADV.SURR. STEREO
MIDNIGHT/
MUTE
LOUDNESS
T
ST
ENTER