Making A Video Recording - Pioneer VSX-409RDS Operating Instructions Manual

Making a Video Recording

The following steps show you how to make a video recording from a video source connected to the receiver,
such as a DVD player, LD player, etc., to a video deck connected to the VCR/DVR connectors.
The receiver's volume, channel levels, tone (bass, treble), S. bass, and surround effects (Dolby
memo
Pro Logic and DSP settings) have no effect on the recorded audio signal.
SOURCE SELECT
SOURCE
DVD CD TUNER
TV CONT. TAPE MD CD-R
$ $ ! !
1 2 3 4
TV FUNC.
@ * & #
5 6 7 8
TV VOL. CHANNEL
EFFECT STATION
9 0
D. ACCESS CLASS
TOP MENU MENU
FQ
RF ATT DISP
ENTER
TEST MPX
TONE SET UP
FQ
2
SORROUND DSP MODE MUTING
CH. SELECT LEVEL
FL MASTER
RECEIVER FUNCTION
DIMMER VOLUME
1
AV MULTI-CHANNEL RECEIVER
Î
REMOTE CONTROL UNIT
1
1 Press the FUNCTION button to select a
source to record.
On the receiver, select the source directly using the front panel
buttons.
2 Prepare the programme source.
Load the DVD, LD, etc.
3 Insert a blank tape or DVR into the VCR/DVR
and set the audio recording level (if
applicable).
Most video recorders set the audio recording level automatically—
check your video's instruction manual if you are unsure whether
yours has manual controls.
4 Start recording on the VCR/DVR, then start
playback from the source component.
Making a Recording
33