Changing Your Reversible Door - Avanti 322YW Instruction Manual

? CHANGING THE REVERSIBLE DOOR
The refrigerator has been built with the door hinges on the right. If you wish to change the opening
direction, follow the instructions below:
Unplug the refrigerator from its electrical outlet.
Empty everything in the refrigerator, including shelves, food, etc.
Remove the upper hinge cover on the right top of the cabinet Remove all 3 bolts holding the
upper hinge to the cabinet along with the spacer underneath.
spacer for later use.
Remove the plastic caps from the upper left holes and transfer them to the uncovered holes at the
right side. Be sure to press the plug buttons firmly into the holes.
Incline the refrigerator backward (do not lay it on the floor). Using a pliers remove the right foot.
Also remove the two bolts holding the lower hinge to the cabinet. Save the bolts, hinge, and
washer for later use.
Remove the left foot and transfer it to the opposite side.
Insert the lower hinge at the opposite side (left) using the two bolts and washer previously
removed.
Mount the right foot previously removed to the opposite side (left). Then mount the leveling foot
in the uncovered hole (right).
Set the door to its place.
While holding the door in the closed position, secure the top hinge at the left side using the three
bolts and spacer previously removed at the beginning of the operation.
Do not tighten the bolts until the top of the door is leveled.
Replace the hinge cover.
Save these bolts, hinge, and
12