Advertisement
OPERATION
8
IMPORTANT: When using solution make sure you follow the dilution instructions and use Hoover solution only.
Solution can only be used with the trigger handle, lance and solution nozzle, or car/outdoor/rotary brush if supplied.
Solution CANNOT be used with the jet and turbo nozzles.
Using solution with your pressure washer
Unhook the solution tube and
Switch the machine on
insert into the solution bag.
and squeeze trigger
Solution only dispensed with
to dispense the water
the trigger handle, lance and
and solution mix.
solution nozzle, or car/out-
door/rotary brush if supplied.
WARNING:
Always make sure the pressure washer is switched OFF before
connecting/disconnecting the pressure hose, lance, accessories or solution
bag.
IMPORTANT: When using your pressure washer the recommended working distance between the nozzle and
surface area or object to be cleaned is 30cm.
IMPORTANT: After connecting the pressure hose, lance and accessories check they are securely fitted and locked
in place before switching on.
IMPORTANT: Always release any pressure build up in the handle prior to disconnecting the hose and accessories .
IMPORTANT: Don't use if the lance and accessories are damaged, broken or worn.
IMPORTANT: Always check brushes are clean and free from grit/hard debris before use.
Using the car brush (included in selected models only, see ' I ncluded with
your machine' )
Attach the car brush to the
Switch on the pressure washer
trigger handle. Firmly push
and squeeze the trigger to
the car brush and trigger
release water spray or water
handle together, turn clock-
and detergent mix.
wise to lock into position.
After use rinse the pressure
washer to prevent blockages.
Inset the solution tube into a
bucket of fresh water (Max
40 C), turn the machine on and
squeeze the trigger for 1 minute.
To remove the brush from the
trigger handle firmly push and
twist the lance anti-clockwise
to unlock. Pull to remove.
IMPORTANT: Always rinse fresh water through your pressure washer and accessories for 1 minute after using
solution to prevent blockages.
To access water filter
To remove water filter, pinch
unscrew water inlet
the inner water filter tab
connector and remove.
with pliers and gently pull.
IMPORTANT: Before storing your machine always make sure no water remains in the pressure washer or hose/
accessories to prevent frost damage. Keep in a dry place above zero degrees and out of the reach of children.
STORAGE
Always store tools, power cord and pressure hose into allocated storage slots.
Removing a blockage in the lance and nozzles
To remove the lance from
To remove the nozzles press the
trigger handle firmly push
nozzle release button and pull.
and twist the lance anti-
clockwise, when unlocked
pull to remove.
WARNING: Before carrying out any maintenance
make sure the machine is switched off and unplugged.
MAINTENANCE
Water filter can be rinsed
under running water
periodically.
Insert the nozzle cleaning
tool into the end of lance
and nozzles to remove
any dirt or debris.
9
Advertisement
