Step 4 Using The Touch Panel - Sony DCR-TRV40 Operating Instructions Manual

Step 4 Using the touch panel

Your camcorder has operation buttons on the LCD screen.
Touch the LCD screen directly with your finger or the supplied stylus (DCR-TRV50
only) to operate each function. This section describes how to operate the touch panel
during recording or playing back images on a tape.
(1) Prepare the power supply (p. 15 to 19).
(2) Press OPEN to open the LCD panel.
(3) Set the POWER switch to CAMERA, VCR or MEMORY/NETWORK (DCR-
(4) Press FN. Operation buttons appear on the LCD screen.
(5) Press PAGE2 to go to PAGE2. Operation buttons appear on the LCD screen.
(6) Press a desired operation item. Refer to relevant pages of this manual for each
5,6
When the POWER switch
is set to CAMERA
PAGE1 PAGE2
FOCUS
PAGE1 PAGE2
To return to FN
Press EXIT.
To execute settings
Press
To cancel settings
Press
24
TRV50 only) while pressing the small green button.
function.
EXIT
END
SCH
SPOT DIG MEM SPOT
EFFT M I X METER
EXIT
LCD SELF
BRT TIMER
OK. The display returns to PAGE1/PAGE2.
OFF to return to PAGE1/PAGE2.
4
FN
2
3
VCR
OFF(CHG)
CAMERA
MEMORY/
NETWORK
1