JVC TH-C90A Service Manual page 36

3.4.2 Removing the rear panel
(See Figs.4 and 5)
• Prior to performing the following procedure, remove the ampli-
fier assembly.
(1) From the back side of the amplifier assembly, remove the
six screws C and screw D attaching the rear panel. (See
Fig.4.)
(2) Take out the rear panel with fan motor backward from the
amplifier assembly.
(3) From the top side of the amplifier assembly, disconnect the
fan wire from the connector
(See Fig.5.)
(4) Take out the rear panel.
1-36 (No.MB570)
CN371 on the main board.
D
C C
Fig.4
CN371
Fan wire
Fan motor
Fig.5
C
Main board
Rear panel