3.1.5 Removing the Main board assembly
(See Fig. 11, 12)
(1) Disconnect the card wires from DVD servo board assembly
connected to connector CN402,
Main board assembly. (See Fig. 11)
(2) Remove the four screws K attaching the Main board as-
sembly. (See Fig. 11)
(3) Remove the four screws L attaching the Main board as-
sembly from back side. (See Fig. 12)
1-12 (No.MB570)
CN403
and
CN404
of the
CN402
K
CN404
Fig.11
L
Fig.12
K
Main board
CN403
K