Connection With Receiver (1) - Pioneer Elite PRO 510HD Operating Instructions Manual

CONNECTION WITH RECEIVER (1)

The audio signal output from this unit can be reproduced on
the receiver when this monitor is connected to the receiver.
When this monitor is connected to the CENTER OUT terminal
of the receiver, the speaker of this monitor can be used as the
center speaker.
Cabl e TV
Rear panel
Speaker
62
<ARB1527>
Spl i t t e r
CATV conver t e r
Receiver
• Before making or changing connections, set the power
switch to off and unplug the power cord from the AC outlet.
• For details of connecting DVD/LD player, VCR, SAT tuner,
etc., refer to page 16.
• After completing connections, perform the "SPEAKER and
AUDIO OUT settings" operation.
AUDIO SIGNAL
ANTENNA
/CABLE
A
B
Speaker