Using The Dab Functions; Entering The Function Menu; Language Filter Function - Pioneer GEX-P900DAB Operation Manual

Using the DAB Functions

Entering the Function Menu

This menu enables selection of DAB functions.
• Select the desired mode in the Function menu.
Each press of the FUNCTION button selects the mode in the following order:
Language Filter (Language) = Announcement Support (Announce S)
= Service Follow (SF) = Service Component (Primary/2)* = Dynamic Label**
* You cannot switch to this mode with a Service that has just one Service Component.
**You cannot switch to this mode with a Service Component that has no Dynamic Label.
To cancel the Function Menu, press the BAND button.
Note:
• After entering the Function menu, if you do not perform an operation within about 30 seconds, the
Function Menu is automatically canceled.
7 Head Unit Group 2 (See page 6)
Changing the Label (FUNC1) = Service Component (FUNC2)
= Service Follow (FUNC3) = No Function (FUNC4) = No Function (AUTO)
Note:
• This unit does not feature FUNC4 and AUTO function capability.

Language Filter Function

When you select another Ensemble or Service, or perform PTY Search, you can set the
unit to give priority to Service Components broadcast in a desired language.
Setting for up to 6 languages is possible. If you switch the Language Filter Function ON when
you have set more than 6 Languages, the Languages least recently set are switched OFF.
(Details concerning each operation are provided in each section.)
1. Select the Language Filter mode (Language) in the Function Menu.
15
Each press
changes the Mode ...