Calibrating Your Hdmi Monitor - Matrox MXO2 Installation And User Manual

42

Calibrating your HDMI monitor

Use the MXO2 proc amp controls to adjust and control your HDMI monitor's
color temperatures for accurate color grading and monitoring of HD and SD
video.
Load and display color bars on your HDMI monitor as explained in the
1
previous section.
If the Matrox HDMI Monitor Calibration dialog box is not presently open,
2
right-click the
HDMI Monitor Calibration
Click Load Factory Default , and ensure that the Blue only option is
3
cleared.
Drag the Chroma slider all the way to the left so that the color bars are
4
shades of black and white.
5 Set the proper black level by adjusting the Brightness control and looking at
the three pluge bars (see
bars should be black and blend into one another, with no visible dividing line
between them, and the right pluge bar should be a barely-visible dark gray
bar as shown below:
Chapter 7, Calibrating Your HDMI Monitor for Video
icon on your Windows taskbar, and choose Matrox
.
Figure 1 on page 44). The middle and left pluge