Installing Your Pcie Host Adapter (For Desktops); Installing And Removing Your Pcie Host Expresscard/34 Adapter (For Laptops) - Matrox MXO2 Installation And User Manual

Installing your PCIe host adapter (for desktops)

The Matrox PCIe host adapter is designed to operate in your desktop computer's
PCIe slot. For detailed instructions on how to perform the following steps, refer
to your computer's documentation.
Shut down your system, unplug the power cord and all the cables from the
1
unit, and open your computer's chassis.
Insert the Matrox PCIe host adapter in an available PCIe slot in your
2
computer, and secure the adapter into place.
Close your computer's chassis, and reconnect the power cord and all the
3
cables to the computer.
Installing and removing your PCIe host
ExpressCard/34 adapter (for laptops)
The Matrox PCIe host ExpressCard/34 adapter is designed to operate in your
laptop's ExpressCard/34 slot.
You must shut down your laptop before installing the Matrox PCIe host
ExpressCard/34 adapter. To install the Matrox PCIe host ExpressCard/34 adapter,
connect the Matrox PCIe cable to the host ExpressCard/34 adapter, and then
insert the host adapter in your laptop's ExpressCard/34 slot until the adapter
clicks into place.
You must shut down your laptop before removing the Matrox PCIe host
ExpressCard/34 adapter from your laptop's ExpressCard/34 slot.
¡ Important Do not disconnect the PCIe cable from the Matrox PCIe host
ExpressCard/34 adapter when your laptop is running.
A
PCIe
cable
Matrox PCIe
ExpressCard/34
adapter
ExpressCard/34 slot
A
Installing your Matrox PCIe adapter
7