SYSTEM SETUP
In Video Setup Page:
1. If Picture is selected, using the Direction and ENTER/OK Buttons to set the panel's picture quality
such like Sharpness; Brightness; Contrast; Hue or Saturation as desired.
2. If Picture Quality is selected, using the Direction and ENTER/OK Buttons to set the
picture quality such like
3. If Aspect ratio is selected, using the Direction and ENTER/OK Buttons to set the aspect ration of
the panel to 16:9 or 4:3 to match the aspect ration of playing movie.
In Preference Setup Page:
1. If TV Type is selected, using the Direction and ENTER/OK Buttons to set to PAL, AUTO or NTSC.
(Note: The TV system in US, Canada and Mexico is NTSC).
2. If Audio, Subtitle or Disc Menu is selected, using the Direction and ENTER/OK Buttons to select
and set the priority of the available language.
3. If Parental is selected, using the Direction and ENTER/OK Buttons to set the rating level as desired
as follow:
►
~
Press the
▲
~
Press the
~
Press the ENTER/OK Button to enter, password enter window will pop up.
~
Enter the six digit password ( default password is 136900 ) by pressing the Numeric Buttons.
~
Press the ENTER/OK Button to save the settings and exit.
~
Rate levels:
1. Kid Saf: Kid safe
2. G: All ages
3. Pg: Parental Guidance
4. Pg13: Parental Guidance less than 13 years old
5. Pgr: Under 17 years old, Parental Guidance suggested
6. R: Under 17 years old, Parental Guidance strongly
7. Nc17: 17 years old or above
8. Adult: Adult only
4. If Password is selected, press the ENTER/OK Button to enter, the subsetting menu will appear.
~ If Password Mode is selected, using the Direction and ENTER/OK buttons to set it On ( activate
the rating level setting ) or Off ( Password is needed ).
~ If Password is selected, press the ENTER/OK Button twice to enter. The New password setting
menu will appear.
~ Enter the six digit password. The Column of new Password will be highlighted.
~ Enter the new six digit password. The Column of Confirm Pwd will be highlighted.
~ Enter the new password again. OK Button on the screen will be highlighted. Press the ENTER/
OK Button to save the setting and exit.
5. If Default is selected, using the Direction and ENTER/OK Button to reset all setting to default setting
or press the SETUP Button to exit without changes.
Sharpness;
Brightness; Contrast; Gamma; Hue or Saturation as desired.
Button to enter, the rating level list will appear.
▼
or
Button to select the desired level.
(Functions depend on the recording of DVD).
19
Video output's