Adjusting The Osd Settings; Adjusting The Brightness; Main Page - Acer Z301C Quick Start Manual

Adjusting the OSD settings

NOTE: The following content is for general reference only. Actual product specifications may vary.
The OSD (on-screen display) can be used to adjust the settings of your LCD monitor. Press the MENU key to open the OSD. You can
use the OSD to adjust the picture quality, OSD position and general settings. For advanced settings, please refer to the following
pages:

Main page

The default function for buttons 1 and 2 are Brightness and Contrast. You can use the Hot Key Assignment function to set these
buttons to your preferred functions.
Turning Modes on or off
From any function page, press
section for more information).

Adjusting the Brightness

Open the Brightness control and select the brightness setting using the Navi/OK button. When you are done, press the Navi/OK
button to go back one level.
1. Brightness
2. Contrast
3. Input
4. Menu
to open the Modes control and select which user-defined profile to use (please see the OSD