Warning To prevent damage to the product or injury to you or to others, read the Thanks for choosing SEII series studio flash. It is a lightweight, compact and following warnings in their entirety before using this product. Keep these durable flash with complete functions.
LCD Panel NAMES OF PARTS Body PROP FUSE:5A 1. Built-in 2.4G Wireless 8. Flash Output Transmission 9. Modeling Lamp is off 2. Built-in Wireless Channel 10. Modeling Lamp is in the PROP 3. Built-in Wireless Channel Dial mode 4. Slave Model Indicator 11.
OPERATIONS When there is flammable accessory on the flash unit, do not keep the modeling lamp on for a long time. It is recommended to cool it down Flash Preparation for one minute after 10 minutes' working. 1. Take down the lamp cover. Install the modeling lamp and put on the glass protection cover and Power Output Control...
Setting the Communication Channel Buzz Function The sound button (8) is used for deciding whether there is sound reminder for ready flash after recharging. When the buzz indicator is on the LCD panel, the buzz function is working; when it is disappear, the buzz function is not working. A “BI”...
Triggering Method Sync cord, Test button, Slave triggering, Wireless control port Flash Duration 1/2000~1/800s Parameters output from the sync cord jack Parameters output from 5V/200mA (only for Godox receiver) the USB port Fuse AC220V-240V~50Hz: 5A AC110V-120V~60Hz: 8A Dimension Flash diameterΦ14cm, Flash diameterΦ14cm,...
Need help?
Do you have a question about the SEII and is the answer not in the manual?
Questions and answers