Table of Contents
Advertisement
Quick Links
CONNEX ProSight
Installation and Operation Guide
Copyright © 2016-2017 Amimon LTD, All rights reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means,
electronic, mechanical or otherwise without prior written permission of Amimon LTD.
Doc P/N: 9040962 | Rev 06 | Printed 17 August 2017
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AMIMON CONNEX ProSight
Summary of Contents for AMIMON CONNEX ProSight
- Page 1 Installation and Operation Guide Copyright © 2016-2017 Amimon LTD, All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical or otherwise without prior written permission of Amimon LTD.
- Page 2 CONNEX ProSight Installation and Operation Guide Home Page| Navigation pane Home Page Home Page Home Page Setup Menu Viewing Device Parameters Connecting to Transmitter Main Menu Options Safety Frequency Management Spectrum Analyzer Safety Instructions Selecting Frequency Mode via OSD Using the OSD Swipe Controller...
-
Page 3: Safety Instructions
Do not use the product if there is any physical damage to the enclosure. ProSight Mobile • For CONNEX ProSight transmitter only – it is normal for the transmitter to become slightly hot during use. However, if the enclosure’s Application temperature becomes too hot to touch, turn the transmitter off and contact support. -
Page 4: Potential Hazards
Near medical and life support equipment – do not operate the CONNEX ProSight unit in any area where medical equipment or life support equipment is in use, or near any equipment that may be susceptible to any form of radio interference. As the CONNEX ProSight Configuration Using unit may transmit signals that could interfere with this equipment, the host communications device must be turned off in such areas. -
Page 5: Introduction To Connex Prosight
Introduction to CONNEX ProSight Home Page Overview CONNEX ProSight is the missing link in a new era in FPV racing. CONNEX ProSight transforms FPV drones into a completely new kind of Safety immersive experience for beginners and experts alike. CONNEX ProSight delivers unparalleled vision performance with delay-free wireless transmission. Superior image quality combined with ease of installation, smooth configuration, and improved experience for multi-pilot flying provides unmatched usability. -
Page 6: Quick Installation Layout
CONNEX ProSight Installation and Operation Guide Introduction to CONNEX ProSight|Quick Installation Layout Navigation pane Quick Installation Layout Home Page Connect camera Connect to flight controller Connect transmitter power Safety Connect antenna cables 2S-4S battery, 7-17V Introduction to CONNEX ProSight Opening the Package... -
Page 7: Opening The Package
CONNEX ProSight Installation and Operation Guide Opening the Package|Quick Installation Layout Navigation pane Opening the Package Home Page Verify that the ProSight package contains the following items: • HD receiver Safety • HD transmitter • HDR camera, mount and dampers Introduction to CONNEX •... -
Page 8: Hd Receiver Accessories
CONNEX ProSight Installation and Operation Guide Opening the Package|HD Receiver Accessories Navigation pane HD Receiver Accessories Name Description Home Page Safety HDMI Cable HD receiver Standard HDMI Cable (Type A to Type A) AMN_CBL_036A Connects the HD receiver to a video monitor or FPV goggles. -
Page 9: Hd Transmitter Accessories
CONNEX ProSight Installation and Operation Guide Opening the Package|HD Transmitter Accessories Navigation pane HD Transmitter Accessories Name Description Home Page Safety HD Transmitter 2 antennas, pre-assembled in the antenna bracket, Antennas connected to the HD transmitter. Introduction to CONNEX AMC_ACC_018... - Page 10 CONNEX ProSight Installation and Operation Guide Opening the Package|HD Transmitter Accessories Navigation pane Name Description Home Page HD Transmitter Power Cable Connects the HD transmitter to an external power source. AMN_CBL_030A Safety Camera Cable Introduction to CONNEX Connects the camera and the HD transmitter.
-
Page 11: Installing The Units
CONNEX ProSight Installation and Operation Guide Installing the Units|HD Transmitter Accessories Navigation pane Installing the Units Home Page The following sections describe the mechanical installation and wiring of ProSight system parts: • Connecting Components to Drone Safety • Installing the HD Receiver •... -
Page 12: Connecting Components To Drone
CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane Connecting Components to Drone Home Page Preparing the Mounting Plate Mark mounting holes for the following components: • Camera (1) – 3 holes Safety • Transmitter (3) – 4 holes •... -
Page 13: Attaching The Hd Transmitter
CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane Attaching the HD Transmitter Home Page The following procedure describes HD transmitter installation. 1. Connect the 4 mounting bases (1) to the mounting plate using 4 screws (2). - Page 14 CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane 3. Connect the HD transmitter to the mounting bases using 4 screws (1). Home Page Flight direction Note: Notice the transmitter orientation. The video connector (2) should Safety face the camera and the antenna sockets (3) must remain exposed.
-
Page 15: Mounting The Camera
CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane Mounting the Camera Home Page Mount the camera on the front of the drone mounting plate. The rubber vibration dampers serve as shock absorbers and help reduce the “Jello”... - Page 16 CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane The camera can be adjusted or flipped: 3. Release the two screws (1). Home Page 4. Set the angle of the camera or flip it 180 , and fasten the two screws (1).
- Page 17 CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane Wiring and Installing the Antenna Home Page This section reviews the tasks associated with installing and wiring HD Transmitter Antennas. Safety Tip: If you decide to design your own antenna fixture, we recommend...
- Page 18 CONNEX ProSight Installation and Operation Guide Installing the Units|Connecting Components to Drone Navigation pane 2. Place the antenna on the rear side of the drone mounting plate. Home Page 3. Fasten the antenna base to the drone with four screws (1) using washers (2) and nuts (3).
-
Page 19: Wiring The Hd Transmitter
CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Transmitter Navigation pane Wiring the HD Transmitter Home Page This section reviews the tasks associated with wiring the HD transmitter. Connecting to Camera Safety Connect the Camera Cable to the HD transmitter video input port (2) and the other end to the camera video output port (1). - Page 20 CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Transmitter Navigation pane Connecting to Flight Controller Home Page Wiring the Telemetry Cable Connect the CC3D Telemetry Cable or the Naze Telemetry Cable Safety the HD transmitter telemetry port (1) and the other end as to the flight controller as follows: •...
-
Page 21: Configuring A Flight Controller That Runs Cleanflight
CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Transmitter Navigation pane Configuring a Flight Controller that Runs CleanFlight Home Page Note: The flight controller must support MAVLink. Safety The flight controller has a specific UART port that supports MAVLink. To receive telemetry information from the flight controller, the MAVLink port needs to be configured through CleanFlight as follows: 1. -
Page 22: Osd Information Delivered From The Flight Controller
CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Transmitter Navigation pane OSD Information Delivered from the Flight Controller Home Page Telemetry information delivered from the flight controller includes: • Flight duration – time starts counting when the drone is armed •... - Page 23 CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Transmitter Navigation pane Connecting to a Power Source Home Page Connect the HD Transmitter Power Cable to the HD transmitter power socket (1) and the other end to the power source.
-
Page 24: Installing The Hd Receiver
CONNEX ProSight Installation and Operation Guide Installing the Units|Installing the HD Receiver Navigation pane Installing the HD Receiver Home Page This section reviews the tasks associated with installing the HD receiver. Connecting Antennas Safety To connect the HD Receiver Antennas to the HD receiver: 1. - Page 25 CONNEX ProSight Installation and Operation Guide Installing the Units|Installing the HD Receiver Navigation pane Connecting the HD Receiver Case Home Page Fasten the case to the HD receiver. Safety Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units...
- Page 26 CONNEX ProSight Installation and Operation Guide Installing the Units|Installing the HD Receiver Navigation pane Mounting the HD Receiver Home Page 1. Place the HD receiver as high as possible on a tripod, pole or any other mounting device. A height of 2 meters off the ground is optimal.
-
Page 27: Wiring The Hd Receiver
CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Receiver Navigation pane Wiring the HD Receiver Home Page This section describes the required wiring for the HD receiver. Connecting to FPV Goggles/Monitor Safety To display the received video, connect the... - Page 28 CONNEX ProSight Installation and Operation Guide Installing the Units|Wiring the HD Receiver Navigation pane Connecting to Power Home Page To connect the HD receiver to a power source: 1. Connect the HD Receiver Power Cable to the HD receiver power port (1) and the other end to a power source.
-
Page 29: Operating The Units
CONNEX ProSight Installation and Operation Guide Operating the Units|Wiring the HD Receiver Navigation pane Operating the Units Home Page The following sections describe the basic functions of the CONNEX ProSight: • Pairing HD Transmitter and Receiver Safety • OSD Control Introduction to CONNEX... -
Page 30: Pairing Hd Transmitter And Receiver
Home Page This section describes the procedure for pairing an HD receiver with an HD transmitter. CONNEX ProSight units are already paired when delivered. The pairing process is required when connecting to an unpaired HD transmitter for the first time. - Page 31 CONNEX ProSight Installation and Operation Guide Operating the Units|Pairing HD Transmitter and Receiver Navigation pane 3. Verify that the Network LED (1) on the HD receiver blinks for a few seconds and is lit constantly when pairing is completed. Home Page This process takes a few seconds.
-
Page 32: Osd Control
CONNEX ProSight Installation and Operation Guide Operating the Units|OSD Control Navigation pane OSD Control Home Page Unit configuration is performed via the on-screen display (OSD) Setup menu. The following section describes OSD control and functionality. Prerequisite Safety • Verify that the HD receiver is powered on. -
Page 33: Navigating In Osd Menus
CONNEX ProSight Installation and Operation Guide Operating the Units|OSD Control Navigation pane Navigating in OSD Menus Home Page Use the following buttons on the HD receiver are used for navigating through the OSD menu options: • NEXT (1) Safety •... - Page 34 CONNEX ProSight Installation and Operation Guide Operating the Units|OSD Control Navigation pane HD receiver button functionality: • NEXT (1) – moves the cursor between menu options. Home Page • SEL (2) – selects the marked option. • MENU (3) – initialize the OSD menu. When OSD is on, turns...
-
Page 35: Switching Between Osd Modes
CONNEX ProSight Installation and Operation Guide Operating the Units|OSD Control Navigation pane Switching between OSD Modes Home Page Clicking the MENU button (1) toggles between the following OSD display modes: » OSD Telemetry (2) – displays the selected OSD viewing mode (see... -
Page 36: Osd Menu Interface
CONNEX ProSight Installation and Operation Guide Operating the Units|OSD Control Navigation pane OSD Menu Interface Home Page A typical menu interface includes the following: • Menu title line (1) • Menu items – up to 4 items can be displayed at a time. - Page 37 CONNEX ProSight Installation and Operation Guide Operating the Units|Main Menu Navigation pane Main Menu Home Page The main menu includes the following sub menus: • Setup – used for settings configuration (see Setup Menu) • Search Drone – used for...
-
Page 38: Setup Menu
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Setup Menu Home Page To display the Setup menu, select Main Menu > Setup. The setup menu enables the following functions: » Managing Camera Settings Safety » Viewing Status »... -
Page 39: Connecting To Transmitter
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Connecting to Transmitter Home Page This section reviews the tasks associated with connecting to the paired HD transmitter (located on your drone) or to transmitters on other drones. - Page 40 CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Connecting to Other Drones Home Page To connect as a viewer to an HD transmitter located on another drone, search for a drone in one of the following ways: •...
- Page 41 CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Search Other Drones by Frequency 1. Select Main Menu > Search Drone > Other Drones by Freq. Home Page 2. Select one of the following commands: Safety •...
- Page 42 CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane • R-Band – displays a list of frequencies within a spectrum used by analog video transmitters. Home Page Safety Introduction to CONNEX ProSight Opening the Package 3. Select Connect To: [Frequency] (1) to connect to the selected Installing the Units frequency.
-
Page 43: Frequency Management
Navigation pane Frequency Management Home Page CONNEX ProSight is a digital system, allowing bi-directional communication between the HD transmitter and its paired HD receiver. When the HD receiver is connected to a transmitter as a viewer (see Connecting to Other Drones), frequency management is unavailable. -
Page 44: Selecting Frequency Mode Via Osd
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Selecting Frequency Mode via OSD Home Page Tip: Frequency management is possible only when the HD receiver is connected to its paired HD transmitter. Safety To select frequency mode: 1. - Page 45 CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Auto Home Page In Auto mode, the system constantly searches for the optimal frequency. When the system detects interference with the current frequency, it instructs both the transmitter and receiver to seamlessly switch to an alternative frequency. This change is done instantly, without any visual effect or video degradation.
- Page 46 CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Navigation pane Fixed frequency Home Page This option enables selecting from a list of frequencies (the list changes according to region). Once a certain frequency is selected, the HD transmitter uses the selected Safety frequency only.
-
Page 47: Setup Menu Options
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Setup Menu Options Home Page Viewing Status To view the communication status, select Main Menu > Setup > Status. The Status menu opens, displaying the following information: Safety •... -
Page 48: Setting Regional Rf
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Setting Regional RF Home Page To select a regional radio frequency mode: 1. Select Main Menu > Setup > Regional RF. Safety 2. Select a mode from the displayed list. -
Page 49: Setting Power Alert Threshold
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Setting Power Alert Threshold Home Page To manage battery power and to set the power alert threshold: 1. Select Main Menu > Setup > Power Alerts. The displayed list changes according to the used battery settings. Each... -
Page 50: Setting Osd Overlays
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Setting OSD Overlays Home Page This section reviews the overlay displayed on top of the video image. The overlay is selected for the following communication modes: •... - Page 51 CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Selecting Viewer Overlay Home Page To set the viewing mode when connected as a viewer: 1. Select Main Menu > Setup > OSD > Other drone. Safety 2.
- Page 52 CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Detailed Overlay Home Page The Detailed overlay displays the following information on top of the live video: • Transmitter name (1) Safety • Camera type (2) – displays an icon, according to the connected...
- Page 53 CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane • Color mode – there are icons for 2 levels and no icon for B/W nor sepia mode (6). Home Page » 1 – color preset 1 »...
- Page 54 CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Race Overlay Home Page The race overlay displays the following information on top of the live video: • Flight duration • Battery voltage Safety Introduction to CONNEX...
-
Page 55: Setting Telemetry Color
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Setting Telemetry Color Home Page To set the color of the telemetry information displayed on the OSD: 1. Select Main Menu > Setup > OSD > Telemetry Color. -
Page 56: Managing Bluetooth Communication
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Managing Bluetooth Communication Home Page Viewing Bluetooth Pairing Code The Bluetooth pairing code is used to connect to the HD receiver or the HD Safety transmitter with a mobile device via Bluetooth. -
Page 57: Managing Camera Settings
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Managing Camera Settings Home Page Accessing Camera Settings 1. Select Main Menu > Setup > Camera Settings Safety Selecting/Viewing camera type This section describes how to manage Connected Camera Type, Introduction to CONNEX The camera is identified automatically. - Page 58 CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Replacing Camera Type Home Page This section reviews the tasks associated with changing camera type (for example, upgrading to ProSight HX Camera There are two options to change camera type.
-
Page 59: Setting Video Mode
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Setting Video Mode ProSight HX Camera ProSight Camera Home Page 1. Select Main Menu > Setup > Camera Settings > Video Mode. 2. Select one of the following modes:... -
Page 60: Color Mode
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Color Mode Home Page Color mode enables selecting color filter, Color Mode is available on only. ProSight HX Camera > Setup > Camera Settings > Color Mode. -
Page 61: Switching To Indoor Mode
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Switching to Indoor Mode Home Page Flicker filtering is performed automatically in the ProSight HX Camera To filter out flickering caused by fluorescent light (for the ProSight Camera) -
Page 62: Flipping The Camera Image
CONNEX ProSight Installation and Operation Guide Operating the Units|Setup Menu Options Navigation pane Flipping the Camera Image Home Page This option is relevant when the camera is installed upside down. To flip the displayed video vertically 180˚, select: Safety Main Menu >... -
Page 63: Configuration Using Prosight Desktop Application
CONNEX ProSight Installation and Operation Guide Operating the Units|Prerequisite Navigation pane Configuration Using ProSight Desktop Application Home Page This chapter describes the CONNEX ProSight mobile application and includes: • Installing the Desktop Application Safety • Connecting to the HD Transmitter and Receiver • Upgrading Firmware Introduction to CONNEX •... -
Page 64: Connecting To The Hd Transmitter And Receiver
CONNEX ProSight Installation and Operation Guide Operating the Units|Connecting to the HD Transmitter and Receiver Navigation pane Connecting to the HD Transmitter and Receiver Home Page Start the ProSight desktop application. When starting the application, and before communication is established, the application displays a NO USB CONNECTION message. -
Page 65: Upgrading Firmware
CONNEX ProSight Installation and Operation Guide Operating the Units|Upgrading Firmware Navigation pane Upgrading Firmware Home Page Tip: Before performing firmware upgrade, connect to the Internet. Safety When a newer firmware version is available, the UPGRADE button (1) appears. Introduction to CONNEX... -
Page 66: Restoring Factory Configuration Settings
CONNEX ProSight Installation and Operation Guide Operating the Units|Restoring Factory Configuration Settings Navigation pane Restoring Factory Configuration Settings Home Page To revert to the default factory settings, click the RESTORE button (1). Safety Introduction to CONNEX ProSight Opening the Package Installing the Units A dialog box is displayed. -
Page 67: Configuration Using Prosight Mobile Application
Configuration Using ProSight Mobile Application |Initial Setup Navigation pane Configuration Using ProSight Mobile Application Home Page CONNEX ProSight can be configured using the CONNEX RMT mobile application. This chapter describes the mobile application and includes: • Home Screen Overview Safety • Viewing Device Parameters •... -
Page 68: Home Screen Overview
Paired Devices (3) – list of receivers that have been paired for ProSight Bluetooth communication in the past • Around Me (4) – list of other CONNEX ProSight receivers in the area. Selecting a device that is not already paired requires entering Opening the Package a pairing code (see Viewing Bluetooth Pairing Code). -
Page 69: Viewing Device Parameters
CONNEX ProSight Installation and Operation Guide Configuration Using ProSight Mobile Application |Viewing Device Parameters Navigation pane Viewing Device Parameters Home Page Tapping the information icon next to the receiver name (1) displays the following device parameters: • Firmware (2) – HD receiver firmware version. -
Page 70: Main Menu Options
CONNEX ProSight Installation and Operation Guide Configuration Using ProSight Mobile Application |Main Menu Options Navigation pane Main Menu Options Home Page The name of the connected unit (1) appears at the top of the Main Menu. The Main Menu includes the following: •... -
Page 71: Spectrum Analyzer
Navigation pane Spectrum Analyzer Home Page The spectrum analyzer measures and displays the magnitude of signals versus frequency within the Connex ProSight frequency range. The spectrum analyzer is an excellent tool to select the optimal frequency Safety for your Connex ProSight. - Page 72 Bar graphs display the energy sensed in each frequency. The bars are color coded according to the following: • Dark red – represents Connex Prosight HD transmitter that transmits on a frequency that is within the regulatory band. Safety •...
- Page 73 Channel frequency (1) • CONNECT Button (2) – to select the channel Safety • Device name (3) – to display the Connex Prosight HD Transmitter name Introduction to CONNEX ProSight Opening the Package Installing the Units Operating the Units Configuration Using...
- Page 74 CONNEX ProSight Installation and Operation Guide Configuration Using ProSight Mobile Application |Main Menu Options Navigation pane Selecting Frequency Home Page 1. Click the CONNECT button of one of the red channels. a message appears. Safety 2. Select the connection type: •...
-
Page 75: Using The Osd Swipe Controller
CONNEX ProSight Installation and Operation Guide Configuration Using ProSight Mobile Application |Main Menu Options Navigation pane Using the OSD Swipe Controller Home Page The OSD Swipe Controller enables controlling and navigating in the OSD on the connected monitor or FPV goggles (see Navigating in OSD Menus). - Page 76 CONNEX ProSight Installation and Operation Guide Configuration Using ProSight Mobile Application |Main Menu Options Navigation pane Frequency Management Home Page Tip: Frequency management is available only when the HD receiver is connected to its paired HD transmitter. Safety To set the frequency mode, tap one of the following modes: •...
-
Page 77: Specifications
CONNEX ProSight Installation and Operation Guide Specifications|CONNEX ProSight Navigation pane Specifications Home Page CONNEX ProSight • Supported LOS range of 1000 ft without any range limitation Safety • Advanced high-definition spectator viewing mode • Receiver unit outputs standard 720p60 over HDMI for reducing motion blur Introduction to CONNEX •... -
Page 78: Prosight Hx Camera
CONNEX ProSight Installation and Operation Guide Specifications|ProSight HX Camera Navigation pane » Proprietary MIPI (14 pin right-angle, JST SM20B-SRSS) – HD video input Home Page • Environmental: » Operating – -10°C to 40°C » Operating humidity – 10% - 90% Safety »... -
Page 79: Prosight Camera
CONNEX ProSight Installation and Operation Guide Specifications|ProSight Camera Navigation pane ProSight Camera Home Page • Advanced high-dynamic-range support (115 dB) • HD 720P30 / 720i60 resolution • FPV optimized for outdoor and indoor flights Safety • Bandwidth - 13 MHz •... - Page 80 CONNEX ProSight Installation and Operation Guide Specifications|HD Receiver Navigation pane HD Receiver Home Page • Power consumption – ~5 W • Power input – 7 V - 17 V; support 2S to 4S batteries; reverse polarity protected • Antennas – 5 antennas (short SMA connectors) Safety •...
-
Page 81: Prosight Delay-Free Hd Camera
Navigation pane Appendices Home Page ProSight Delay-Free HD Camera CONNEX ProSight can be connected to one of the following delay-free HD cameras: Safety Prosight HX Camera The HD ProSight HX camera, providing HD video capture (1280x720 pixels). Introduction to CONNEX The CMOS HDR camera is used for both indoor and outdoor flights, with a 1.4mm HD rated lens with IR filter, providing a 126... -
Page 82: Video Modes
CONNEX ProSight Installation and Operation Guide Appendices|ProSight Delay-Free HD Camera Navigation pane ProSight Camera Home Page The HD ProSight camera is equipped with a 115 dB high-dynamic-range 1/3” sensor, with 4.2 micron pixel size for HD video capture (1280x720 pixels). -
Page 83: Technology And Output
Size Factor Flexibility and Setup ProSight The CONNEX ProSight camera is a CMOS sensor based camera which allows the smallest form factor combined with best performance. The camera uses a rolling shutter which requires a stable platform or mechanical system dampening. -
Page 84: Connex Prosight Antenna Guidelines
This is also the case with most circular antennas. Opening the Package Antenna Configuration CONNEX ProSight uses MIMO (Multiple Input and Multiple Output) and diversity technology. The ProSight HD transmitter uses two transmitting Installing the Units antennas, and the ProSight HD receiver uses five receiving antennas. -
Page 85: Line Of Sight
• CONNEX ProSight antennas should be installed 33°C back from the vertical position. This allows the antennas to be vertical during most of the flight time (producing the best antenna pattern), while the drone tilts forward. This configuration also allows for stable transmission when rolling the drone. -
Page 86: Connex Prosight Frequency Management
Opening the Package CONNEX ProSight is a digital system, allowing bi-directional communication between the ProSight HD transmitter and the ProSight HD receiver. The user manages frequency configuration and operating modes by setting them on the HD receiver. Configuration is performed using either: •... -
Page 87: Automatic Frequency Selection
ProSight Mobile activity (usually meteorology radars). Application By complying with the DFS requirement, the CONNEX ProSight System can use a larger set of frequencies, which would otherwise be restricted. Tips: Specifications • Analog systems are restricted from using the DFS bands •... -
Page 88: Regional Frequency Specifications
CONNEX ProSight Installation and Operation Guide Appendices|Regional Frequency Specifications Navigation pane Regional Frequency Specifications Home Page The ProSight system operates over the full span of the 5 GHz unlicensed band. Ranging from 5150 MHz to 5925 MHz, the system has a total of 62 different center frequencies to operate on. -
Page 89: Regional Frequency Table
CONNEX ProSight Installation and Operation Guide Appendices|Regional Frequency Specifications Navigation pane Regional Frequency Table Home Page ProSight HX Camera Region Channels Recommended center frequencies Pro-A Pro-B Pro-C Pro-E Pro-F 5750 5780 5810 Safety Pro-AB Pro-C Pro-EF 5665 5695 5750 5780 5810 5840 5870 5900... - Page 90 CONNEX ProSight Installation and Operation Guide Appendices|Regional Frequency Specifications Navigation pane ProSight Camera Region Channels Recommended center frequencies Home Page Pro-A Pro-B Pro-C Pro-E Pro-F 5740 5760 5780 5800 5820 Pro-A Pro-B Pro-C Pro-E Pro-F 5665 5685 5705 5740 5760 5780 5800 5820 5840 5860 5880 5900 5920...
Need help?
Do you have a question about the CONNEX ProSight and is the answer not in the manual?
Questions and answers