Updating Inno Firmware; Using Xm+Napster; Using The Update Tool; Using The Web - Pioneer Inno2BK GEX-INN02B User Manual

Updating inno Firmware

Occasionally we make improvements to the inno firmware, which is the software that makes
your inno work. Updating the firmware is a quick and easy process.
Remember that:
Your inno must be docked with a power adapter and must be connected to your PC. You
■
cannot update the firmware if inno is not docked and powered.
Your PC must be connected to the Internet
■

Using XM+Napster

If you have installed and use XM+Napster, it automatically checks the firmware when you
connect inno to your PC. XM+Napster notifies you when it's necessary to update the
firmware. Simply follow the instructions.
Don't worry if you miss a firmware update. XM+Napster will always check whether your inno
needs an update or not.
64
Updating inno Firmware
Updating inno Firmware
Using the Update
Tool
If you don't use XM+Napster, you can
update the inno firmware manually.
1. Insert the XM+Napster CD in your PC's
CD-ROM or DVD drive. The XM+Napster
software should start automatically.
2. Click on Browse CD.
3. Click on Utils, then click on
XMFirmwareUpdateClient.
4. Follow the instructions on the PC
screen.
You can run this firmware update tool at
any time. If the firmware needs to be
updated, the tool will install it automati-
cally. If the firmware is already up-to-date,
nothing happens.

Using the Web

Point your Web browser to http://fwupdt.xmradio.com and follow directions.
65
Updating inno Firmware