Updating The Xmp3 Radio Firmware; Disconnecting Xmp3 Radio From A Pc - Pioneer CD-XMCASE1 User Manual

Updating the XMp3 Radio Firmware

Occasionally we make improvements to the XMp3 radio's firmware, which is the software
that makes your XMp3 radio work. Updating the firmware is a quick and easy process:
Remember that:
• Your XMp3 radio can be either docked or undocked with a power adapter
plugged in and must be connected to your PC. You should not attempt
updating the firmware if your XMp3 radio is not connected to an external power
source.
• Your PC must be connected to the Internet.
Visit http://fwupdt.xmradio.com and follow the directions.
Disconnecting the XMp3 Radio from a PC
To disconnect your XMp3 from your PC, you must follow these steps:
1
Click on "Eject" on the lower left-hand corner of the XM2go Music Manager
screen.
2
XM2go Music Manager will sync with your XMp3 radio, then inform you
that you can disconnect your XMp3 radio.
3
Unplug the USB cable from either the PC or your XMp3 radio.
NOTE! DO NOT use Windows' "Safely Remove Hardware" button as it does not
properly sync XM2go Music Manager with your XMp3 radio.
53