Installation - A4Tech RFSOP-27A User Manual

Congratulations on your purchase! Cut the cord and surf with this RF Optical Mouse. Your new RF Optical Mouse is easy to
install and offers you a host of versatile useful features. The Radio receiver can be conveniently placed to give you the freedom you
need while working. The Optical technology provides precise optical sensor and the advantage of operating a mouse without mouse
pad The vertical wheel allows you to scroll, or zoom in and out in a document. You can program the mouse buttons to launch the
NetJump or LuckyJump for a quick start to programs you run frequently. Also, your RF Optical-Mouse has 255 innovative user ID
codes, so other RF (Radio Frequency) pointing devices won't affect your system. It has reliable 2-channel digital radio technology
and the operational range is within 1.5 meters.
There are many other unique functions to this RF optical mouse such as: sleep mode, indicator system, and rechargeable
technology. With our provide NiMH rechargeable batteries; this RF Optical Mouse can be used for long continuous hours. This "one
and only" rechargeable optical mouse allows you the advantage to recharge the mouse after the battery runs out of power in just 2.5
hours. No more need to replace expensive countless battery. Read on the following to start running your personal RF Optical Mouse!
Connecting the RF Optical Mouse Receiver
To connect your mouse receiver to a USB mouse port:
Locate an available USB mouse port on the back of your computer.
1.
Insert the USB mouse port connector into the USB mouse port.
2.
To connect your mouse receiver to a PS/2 mouse port
1. Locate an available round 6-pin PS/2 mouse port on the back of your computer
2. Insert the USB connector to PS/2 adaptor.
3. Then plug it into the round 6-pin PS/2 mouse port.
The RF-Mouse uses two NiMH rechargeable AAA batteries. For best performance, use only NiMH,
rechargeable, or other high- quality batteries. These batteries can be used for long continuous hours
and saves the pain to buy and replace countless batteries.
Refer to the following to insert the batteries:
1. Press the tab on the bottom of the mouse cover as shown here and remove the cover.
2. Insert the two rechargeable AAA batteries. (The correct polarity is indicated on the battery
compartment casing.)
3. Replace the cover.
— 2 —
Introduction

INSTALLATION